Question about 2000 Hyundai Elantra

1 Answer

How do i remove rear drivers side door panel in 1999 Hyundai Elantra

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

Most door panels are just cliped in but you do have some screws. stars, if you start at upper right and to the right your first one is in the door pull or opener area, then there is one inside the light at the edge of panel. (if this is appacable). pull up and away from door slowly to make sure that all screws have been removed and that you do not pull apart any wires.

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Hyundai Elantra SE - Driver side rear door won't open from the inside or outside.


You will need to remove the inside door panel, what that takes I don't know, but it must come off to access the door latch, there you will likely find the latch release control rod has come off or the latch is defective.

Jun 20, 2017 | Hyundai Cars & Trucks

1 Answer

Need to intall new front exterior drivers side door handle on a 2002 Hyundai Elantra GLS


remove the interior door trim and you will see small nuts holding the handle onto the outer door skin. Remove any rods /clips and undo the nuts and the handle will come out.

Mar 18, 2014 | Hyundai Motor 2002 Elantra

1 Answer

How do I safely remove the diver's side rear door panel on a 2010 Hundai Elantra wihout damaging?


Using an engine puller (hydraulic crane) lift slightly on the door. Remove bolts and wire connectors. Door is now hanging on the engine puller hoist.

Aug 16, 2013 | 2010 Hyundai Elantra Touring

1 Answer

Remove inside door handle driver side hyundai elantra 2001


probably not. most inside door handles are push on and held with a spring clip that requires a flat tool that slides between the handle and the plastic washer or the plastic plug in the center of the handle prises out and ther will be a small screw to remove then the handle slips off. Normally the screw has a 8 mm head or a philips screw recess

Jan 10, 2013 | Hyundai Motor 1999 Elantra

1 Answer

What is approx. cost to have dealer replace driver side window switch on 2001 Hyundai Elantra? If I try it myself, any suggestions about popping the door panel? Thanks.


Removing a door panel is fairly easy. You need to remove around 10 screws from the door panel. each screw has a small plastic cover over it, that can be easily removed by a small flathead screwdriver. After all of the screws are removed, you have to pop the door panel off, and unclip all of the wires.
!!GOOD LUCK!! hope this helps
Matt

Jun 25, 2011 | 2001 Hyundai Elantra

1 Answer

I need to replace the drivers side interior door handle on my 1999 elantra hyundai. What are the steps to do this?


you need to take the WHOLE interior panel off the door and work from there if you've got the guts then go ahead else get some help,
good luck

Jul 28, 2010 | Hyundai Elantra Cars & Trucks

1 Answer

How to replace interior door latch on elantra?


Remove any and all screws from the door panel, including removing lock and window controls. then take a large flat-tipped screwdriver and pry off the panel all the way around. FInally lift panel up and off the door. Now you will have access to the inside of the door. Everything from here is self explainable.

Dec 07, 2009 | Hyundai Motor 1999 Elantra

1 Answer

Remove door trim to replace power window switch


you dont have to take the trrim off on this car look at the outline of the switch open from rear and pull forward then you can change the window switch/ Please rate my response thank you very much

Jan 31, 2009 | Hyundai Motor 2003 Elantra

Not finding what you are looking for?
2000 Hyundai Elantra Logo

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...