Question about 1999 Chevrolet Silverado 1500

1 Answer

Wont go into gear - 1999 Chevrolet Silverado 1500

Posted by on

  • Carl
    Carl May 11, 2010

    Auto trans ? Manual thrans ? Please add details..

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 21 Answers

Need more info than that. assuming its an auto tranny: check your transmission fluid level. if that is good, there are a number of possibilities. there could be a blocked tranny cooler line, clogged filter, or passage in the valve body. there could be faulty shift solenoids. possibly (but not likely) a bad shifter cable. depending on the year and the transmission there are service bulletins regaurding shift solenoids. if thats the problem i suggest you take it to a good tranny shop, or get a tranny from the junkyard. usually when the solenoid goes out to the point the vehicle won't go into gear, the clutches have been damaged to the point they need replaced, and that is definately not a DIY project.

Posted on Aug 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

6 speed tremic manual gear box wont hold in revere


It because of the forks inside the transmission are worn out or they have lost their plastic pieces on the fork ends.(some transmissions are built this way, plastic). you have to pull the transmission to fix it.

Dec 27, 2014 | Cars & Trucks

1 Answer

Jeep runs but will not change gears


automatic? trans, mines a 6speed, and has a clutch.
my guess is yes,
my A/T will not change gears,
all gears slip? (slip , flare or?)
or wont move at all. the car?????
or is stuck in1st gear in drive.?
or wont move in reverse. why not tell full story on so complex a device. super complex it is.
wont up shift , wont down shift
skips gears.
??????????????????

check fuses first.
then scan the PCM, it will tell you errors, called DTCs
use a real scan tool that can scan 2010 Jeeps. (factory codes !!!)
not some autozoned junk.

id bet there is a code, for sure.
even a broken shifter switch, or?

Aug 17, 2014 | 2010 Jeep Wrangler Sahara

1 Answer

Wont go in gears


My 1988 HD 883 SPORTSTER WONT GO INTO GEAR. WHEN TRYING IT GRINDS When not running it wont go into gear either

Jan 06, 2014 | 2003 Kia Spectra

1 Answer

Buick gear shifter moves freely and wont shift gears


you can shift it at transmission by hand to neutral or park and have someone inside start the car and you manually put in gear under hood and drive it to shop or garage, wherever

Feb 06, 2013 | 2000 Buick Century

1 Answer

Transmissiom wont shift low range light on


HI;
I pressed low range button and the light still on and gear change very fast o only to 3 gear wont go 4th gear how i can fix it please helpme

Nov 10, 2012 | Cars & Trucks

1 Answer

Replaced clutch but it still wont go into gear. Wont shift what else could be wrong?


Do you mean you can't shift it into gear? or you can shift into gear but the car wont move?

Nov 14, 2009 | 1997 Mazda Protege

1 Answer

The tranmission wont change gears


If it is standard check your throw out bearing

Sep 30, 2009 | 1988 Ford F 150

1 Answer

1995 crown vic gear problems/gear shift wont lock


most likely the shift tube bushings are bad- you may have also lost a few screws in the shift tube or they could just be loose. you have to pull the steernig column down to inspect/repair it.

May 30, 2009 | 1995 Ford Crown Victoria

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...