Question about 1993 Ford F250

1 Answer

My ford f250 goes into reverse sometimes, other times it doesn't move at all, drive works fine. Any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,865 Answers

Check the linkage. Set the parking brake, and examine the transmission where the linkage connects to the actuator on the transmission, and have somebody operate the shift lever. Take note if the transmission is going into reverse or not and if the actuator on the transmission is always going to the same spot.

If this test does not reveal a problem, disconnect the linkage from the actuator, and move the actuator by hand to the reverse position. you should feel it fall into the reverse position. If it does fall into the reverse position, and the transmission fails to go into reverse, then take it to a transmission shop

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I start my truck and it has full power, everything working. I put it in drive push the pedal to the floor and have no power. If i kill it and restart it it drives fine sometimes and other times no power at...


If the truck is a diesel, I would look at the EGR valve and the throttle position sensor. The TPS and even the EGR should turn the check engine light on and set a code.
There was also a problem with the turbo boost sensor.

Aug 27, 2012 | 2004 Ford F250

1 Answer

2001 ford f 250 deisel why thse the heater blower fan on my truck sometimes work and sometimes doesn`t?


sounds like a faulty switch and if it is you sould replace it before it completely goes out

Dec 25, 2010 | 2001 Ford F250 Super Duty Super Cab

1 Answer

I have a 2001 ford f250 powerstroke diesel was driving and transmision started to slip drove about 3 miles and now wont move forward at all but reverse works fine


Some of the Ford transmissions actually have an aluminum gear which will go out somewhere around 150 to 200 thousand miles. OR it could be really low on transmission fluid.

Oct 18, 2009 | 2001 Ford F250 Super Duty Super Cab

1 Answer

1999 F250 only goes in reverse, no forward gears.


I believe that reverse is operated by a brake band. So it seems to be stuck. It is operated by a piston, and the seal could have swelled and caused too much friction. But you could loosen up the adjustor so that it is disengaged, in order to get forward gears again. Perhaps you can force the piston to retract as well, once you drop the pan again.

Jun 26, 2009 | Ford F-250 Cars & Trucks

1 Answer

TRANSMISSION COMES OUT OF DRIVE WHEN I STOP THE CAR


Start with a complete flush of the trany and torque converter, and a filter replace. That should fix the problem, but the Taurus has a bad reputation for trany's going out frequently.

Jun 08, 2009 | 1998 Ford Contour

1 Answer

Reverse works fine! nothing else does!!!


both of u are going to need new transmissions, Taurus transaxle units are very prone to failure arount 100,000 miles.

Jan 15, 2009 | 1998 Ford Taurus

1 Answer

I have a 1995 ford f250 with the 7.3L diesel. The vehicle makes a large sucking noise when cold, and the engine loses power. when the rpm's pick up, it regains power and drives well. Problem goes away when...


The problem is due to a lack of compression in the engine when the truck is cold, try using the engine block heater more, or allow more time for the truck to warm up.

Jan 02, 2009 | 1995 Ford F250

1 Answer

01' F-250 SD noise in trans


have the transmission rebuilt sounds as if drive gears are wore out.

Oct 09, 2008 | 2000 Ford F250 Super Duty Crew Cabs

Not finding what you are looking for?
1993 Ford F250 Logo

Related Topics:

682 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...