Question about 1996 Ford Ranger SuperCab

2 Answers

Dash light would not come on at night

I have a 1996 extended cab ford ranger dash light would not come on at night could any one please give me idea what wrong
thank you all for your help

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 398 Answers

Most of the time that problem lies in the headlight switch. Check your fuse for dash lights also. does your dome light come on?

Posted on Jul 14, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 1,348 Answers

Do all the functions and lights work in the cluster?there may be a loose plug or bad soldering. move the dimmer switch,any affect?it could be open.check the dimmer with a test light.the headlight switch could be bad,but if worn out,the headlights would most likely have an issue.

Posted on Jul 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Ford Ranger Extended Cab Heater Core Replacement


Not an easy job. Drop the steering column and remove the dash first. Then remove the plenum. Core is between the plenum and fire wall. Get a manual. Your saving hundreds doing it your self. 30 dollars for a manual is worth it.

Jan 26, 2015 | 2002 Ford Ranger

1 Answer

Lights / hi and low beam failure


relays are either under hood on driver side or in fuse panel under to left of steering wheel or could be on side of dash as you open drivers door

Jan 13, 2014 | 1998 Ford Ranger SuperCab

1 Answer

2001 Ford Ranger, 4wd doesn't work. The 4wd light on dash flashes 10 times about every two minutes.


There is obviously an issue with the transfer case. I doubt anything mechanical is wrong. Take it to your nearest autozone they can scan the code and give you a general idea of what to look for. 99.9% of the time they can help point you in the right direction. I had a smiliar problem with my exploder but mine was simply a shorted wire in the 4x4 high low selector switch assembly.

Feb 13, 2010 | 2001 Ford Ranger Regular Cab

1 Answer

The 2002 Ford Ranger XLT airbag light blinks


The airbag is there, what's most likely wrong is the key switch may be going bad. Take your Ranger to a reputable mechanic and ask them to check it...unless you have an OBD II or a multimeter.

Jan 11, 2010 | 2002 Ford Ranger Regular Cab

1 Answer

2003 ford ranger extended cab 4 door the door


you have a door switch going bad. next time the lights dont go out unplug them one by one until the lights go out this is the one that is bad

Dec 30, 2009 | Ford Ranger Cars & Trucks

1 Answer

2001 ford ranger no brake lights


check fuses under the dash and in the engine compartment/ Please rate my response thank you very much

Feb 01, 2009 | 2001 Ford Ranger Regular Cab

1 Answer

Loud poping sound under truck when driving as up and down shiftin


Could be the ujoints ,just a couple of bolts that hold in UJoint...Have you checkes your trans and motor mounts?

Jan 23, 2009 | 1996 Ford Ranger SuperCab

1 Answer

Not working


It sounds like it might be a problem with general electronic module, it is located behind the radio on the left side.

Jan 12, 2009 | 2002 Ford Ranger Regular Cab

1 Answer

I have a 1996 Ford Ranger extended cab with automatic transmission. In drive the transmission slips. It just started to do this after a replaced gas tank. I checked the fluid and it is at correct level....


Run and obd2 scan at autozone or advance. this is free. This will let you know if any sensors are bad and it will give you a course of action. It could be your input or output speed sensor or your ECM or TCM. Exhaust these options before pinpointin the transmission as the problem Its also possible when they replaced the gas tank they dislodged a ground connection. Good Luck

Dec 08, 2008 | 1996 Ford Ranger SuperCab

Not finding what you are looking for?
1996 Ford Ranger SuperCab Logo

310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...