Question about 1999 Suzuki Esteem

1 Answer

How to replace a serpentine belt on 1998 jeep wrangler

I don't know where the tension pully is on a 1998 jeep wrangler 4.0 could you tell me please

Posted by on

Ad

1 Answer

Eldric Venne
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    All-Star:

    An expert that got 10 achievements.
    MVP:

    An expert that got 5 achievements.
    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Should be the pulley underneath the power steering pulley. Loosen the nut, then back the bolt down the loosen the belt, tighten the bolt to tighten belt.

Posted on Jul 14, 2009

  • bitNation Dec 12, 2010

    polarcycle is right. The power steering pulley is on the top right of the engine. On the pulley just below the power steering pulley, loosen the center bolt. Behind the plate that the power steering pulley is mounted to, there is a 7" bolt that is at a 45 degree angle, loosen that bolt to release tension. It took me a bit to find the 7" bolt, so hopefully this helps.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

6ya.com

6ya - Get Instant Help

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to put a serpentine pulley back on
if it is a v8, the tensioner is on the passenger side, and it you need a ratchet and socket to turn it clockwise. Put the belt around the pulleys like the picture. WHy did the belt come off? If the tensioner pully came off, its usually jsut one bolt that holds it on ab032765-7437-4262-9c08-0abc6eec7c6e.jpg

Apr 08, 2014 | 1998 Jeep Grand Cherokee

2 Answers

I may have installed the serpentine belt incorrectly on my 1998 Jeep Wrangler with the 4.0 eng and AC. I am having problems with the engine overheating. Can you send me a diagram of the correct way to...
this is for a system with a/c. If you don't have a/c let me know and I will get you the correct one but i'm sure that you have a/c and power steering.


360dreamworx_55.gif

Aug 26, 2011 | 1998 Jeep Wrangler

1 Answer

How do i replace serpentine belt on 1997 jeep wrangler
Adjustment is made by loosening the power steering pump. There is a transverse long bolt (jack bolt) right under the pump that is used for adjustment.

Aug 02, 2010 | 1999 Jeep Wrangler

1 Answer

Change serpantine belt
The easiest way to change a serpentine belt is to go and buy a serpentine belt tool (Around $15-$20 at the auto parts store.) It's a long, flat wrench with bits that will fit most belt tensioners. The idea is to move the belt tensioner down, to allow the belt to relax so you can pull it off.
Once you have the belt off, follow the serpentine belt installation diagram on a sticker, located under the hood. Then, while pushing down on the belt tensioner, slip the belt on to the last pully and then slowly bring the tensioner back to tension. Double-check your belt routing with the belt diagram before starting your Grand Cherokee.

I hope this helps! :)

Jul 07, 2010 | 1998 Jeep Grand Cherokee

2 Answers

Need to know how to adjust serpentine belt, please show diagram. 6 cyl engine.
Really don't need a diagram. Loosen the slide bolts on the power steering pump. loosen or tighten the pump by turning the jack screw (long transverse bolt) under the pump. Once the belt is tightened up, lock down the slide bolts and you are finished.

Jun 17, 2010 | 1994 Jeep Grand Cherokee

1 Answer

Need routing diagram for serpentine belt - '98 Jeep Wrangler, straight six with and without A/C
Click of the following direct, Free Link. It has several Serpentine Diagrams, including the one for your 1998 Jeep Wrangler 4.0L In-Line 6-Cylinders based upon your Engine Options (AC/No AC, Power Steering/No Power Steering, etc.).
The Link Page ALSO has the 2.5L In-Line 4-Cylinder Serpentine Belt Diagrams with their various engine options.
Included are the with AC / without AC Routing.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/1998/make/jeep/model/wrangler/1998_jeep_wrangler_drive_belt_routing_diagram.htm

Apr 13, 2010 | 1998 Jeep Wrangler

1 Answer

Serpentine belt tensioner - cant get the pulley to move. Bolt turns but not the tensioning pulley. Help? 1998 Wrangler with AC/PS 4L 6cyl.
Go the other direction. It takes a breaker bar to move the tension arm.

Mar 14, 2010 | 1998 Jeep Wrangler

1 Answer

Can not get the serpentine belt loose or off my 98 jeep wrangler???
Look for the belt tensioner. On some models, all that is required is to use a socket and ratchet to lift the tensioner. SInce your vehicle is a 98 model, the tensioner should be an automatic type that just lifts up. If that is the case, then lift up the tensioner to remove and to replace the belt.

Feb 15, 2010 | 1998 Jeep Wrangler

1 Answer

94 wrangler 4 cylinder makes a whining noise and wont turn over when you try to start it, the serpentine belt does not move, it cranked over a couple of times but it was making a grinding sound and i...
Sounds like something in the engine "froze" or stuck Unhook the battery and try turning the engine with a wrench/rachet both ways. Check the timing belt, if broken the pistons will come up and hit the valves then stop everything from turning. Is one of the pullies stuck? Take off the serpentine belt and check all pullies to see if they turn.

Jan 14, 2010 | 1994 Jeep Wrangler

1 Answer

Hi, I want to remove my worn alternator belt on my Toyota Corolla 1998 1.8L Engine 7AFE (not Serpentine belt). Anyone know correct procedure or how to release the belt tension? Thanks Phil Auckland New...
i use a 1/2 inch leverage bar .there is a hole in the tension pully(usually the top pully) put the end of the bar in the slot and pull. you will have to hold the tension on it with the bar while you remove the belt.

Apr 25, 2009 | 1998 Toyota Corolla

Not finding what you are looking for?

View Most Popular

1999 Esteem

  • Cars & Trucks

Related Question

How to put a serpentine pulley back on

  • 1998 Jeep Grand Cherokee

Open Questions:

0 Answers

CHEVY 5.3 K1500 ENGINE CUTS WHEN COLD WHEN FIRST ACCELERATING

May 03, 2014 | 1999 Suzuki Esteem

0 Answers

noise in shock

Apr 18, 2014 | 1999 Suzuki Esteem

0 Answers

replacing alternator 1999 suzuki esteem

Feb 09, 2014 | 1999 Suzuki Esteem

0 Answers

Suzuki esteem speedometer not working

Oct 29, 2013 | 1999 Suzuki Esteem

See all 1999 Suzuki Esteem Questions

Related Topics

1999 Suzuki Esteem Logo

1,554 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

1999 Suzuki Esteem

2000 Suzuki Esteem

2001 Suzuki Esteem

2001 Suzuki Esteem

2000 Suzuki Esteem

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...