Question about 2000 Chevrolet S-10

2 Answers

1996 z-71 well not start when the dew point is high, it well try & I have burnt starter out on my truck but it well not start. When I get it to start it misses untell things get wrmed up. can you help me???

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 56 Answers

What does your Oil Pressure do while trying to crank?
How high is the dewpoint in which the vehicle does not start?
Check that all your vacuum lines on your engines are connected.
Get back to me when you check these things.

Posted on Jul 16, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 1,348 Answers

Your air flow meter is probably no good.the sensor is telling the computer to lean out the mixture too far.have the air flow meter,located on the air intake hose tested by a gm dealer.
it is a very delicate screen with 3 sensors across the very thin wire mesh ,so it is very fragile.

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1985 vette starts up cold good and no smoke but after warm up it don't want to crank when it does it has black gray smoke for a min what's wrong


not starting when it gets warm could be a starter problem, the amp draw is probably to high for the battery to supply enough power to start. starter draw should be around 150-200 amps. the black gray smoke is too much fuel that isn`t being burnt. if the starter draw is too high then there isn`t enough voltage for the ignition system to fire the plugs properly causing the smoke.

Aug 25, 2014 | 1985 Chevrolet Corvette

4 Answers

Cadillac wont start


Is the security light on? With mine, I went thru similar {Starter & Battery} and still no start. Leave the key on for 10 minutes...turn off & try. When starting. always wait for security lite to go off...otherwise no power. I went thru hell with this!!

May 29, 2014 | 1991 Cadillac DeVille

1 Answer

My 1990 chrysler new yorker clicks when i try to start. A little later i try again & starts right up & runs fine. Within a couple days it wont start, only clicks once...repeat


Probably the starter solenoid. Over time the contact points, or plates, inside the solenoid get pitted or worn down. The starter will have to be removed to separate the starter motor and solenoid. Or just get a used starter and try it.

Mar 19, 2013 | 1990 Chrysler New Yorker

1 Answer

My winstar 2000 do no start


Try to find where your starter motor relay is & replace. You will probably need a workshop manual from your local auto store. Also check fusible links aren't burnt out, coming off the positive battery terminal, & also check the negative terminal has a clean earth to the chassis & engine block. Also check positive & negative connections to the starter are clean & tight.

Feb 18, 2013 | 2000 Ford Windstar

1 Answer

1994 camry won't start after cleaning under the hood check dist. cap replaced spark plugs sounds like its going to start then doesn't.


Sounds like wet or moist spark plug wires. If this also occurs during early morning high dew point humid air, then you may have spark plug wires shorting out.

Replace wires.

Jul 02, 2011 | 1994 Toyota Camry

2 Answers

MY 2005 DODGE DURANGO WILL NOT START UNLESS IT IS JUMPED. THE BATTERY POWER WAS TESTED AT ADVANCED AUTO. ACCORDING TO THE SALES REP, THE POWER WAS GOOD (450 OUT OF 600). WHAT COULD BE THE PROBLEM?


450 out of 600 what? sounds like you have somthing drawing power need an amp meter. remove key and leave window down. disconnect negitive battery cable and connect meter between the negitive cable and negitive termainal on the battery should see around 2.5 milliamp draw or less may take 1/2 hour to get to this point. also if this vechile is not driven often this could be the problem

Aug 23, 2009 | 2005 Dodge Durango

1 Answer

Our car interminately does not start after a nightfall heavy rain or high humidity and dew point in first thing in the morning.The car starts fine at all other points of the day.


I take it, it turns over ok.Spray the ignition wires with WD-40,that's a water displacer. If it starts ok then, replace the wires. If still no start then spray the distributor cap. It may have a crack in it (that you can't even see). If there's moisture inside the cap, you've found it.Finally try spraying the ignition coil tower ( where the big wire comes out). That can be cracked too.

Jun 10, 2009 | 1999 Isuzu Rodeo

1 Answer

Saturn sc2 wont start


You most likely have a burnt terminal in your Inside fuse block.Easiest way to check this is to remove the console trim panel next to the drivers side front of console,just pulls loose.Then while trying to start the engine reach down & wiggle the wring going into the front 68way connector.If it takes off & starts to crank you have a burnt terminal in the fuse block.If you remove the front connector (68 Way) there are 2 of these 68 ways in that block.You can look inside at the male terminals you will see one terminal with plastic melted around it.If you see this,that''s your problem!! You will need to find a used Fuse block at junkyard with same Part #.Very important to get same part!! Hope This helps

May 14, 2009 | 1995 Saturn Sc

2 Answers

1987 bronco will not start


Ford used alot of fuseable links, mostly around starter selenoid, look around for them and everyone you find try pulling them apart if there bad or burnt they will pull apart and there is your problem. If you don't find one burnt, than its got to be in the wire comming from the switch, heck there might be one of them fuseable links in that wire too.I never had to go that far to find a burnt one it was always around the selenoid or starter.

Feb 12, 2009 | 1987 Ford Bronco

1 Answer

I was told that having replacement starters for my dodge diesel truck was a result of inadequate electrical capacity from my optimas one red top & one blue top that are seeming to work great to me. The...


Diesel engines like yours are ultra high compression, so they are hell on starters huge amp load to spin engine, make sure the battery has the max cold cranking amps availiable, have your battery tested and verify it's cranking amp capacity,I would use the original equipment battery from Dodge, they are rated as one of best along with Delco from GM.

Sep 09, 2008 | Dodge Ram 2500 Cars & Trucks

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...