Question about 2002 Land Rover Discovery Series II

1 Answer

Purchased a 2002 Land Rover from a local Auction with 72k. The car was sandwiched between 2 cars and the damage was minimal.The SUV starts right up but could only go in reverse.The truck will move on forward on low gear and you can manually shift it.But as soon as you come to a complete stop you have to start all over again. Replaced the transmission control computer.Is there a fuse or relay for the transmission? Can anyone help me solve the misery?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 44 Answers

I'm guessing that the gearbox speed sensor was damaged in the shunt, this can happen if the gearbox was in park when it happened - causes internal damage to quite a lot of components. The speed sensor tells the gearbox the speed of the input shaft and the transmission control computer then signals the gearbox to change gear accordingly. If this is damaged it could account for the symptoms. Suggest taking to a LR dealer for diagnosis, they should pick up any sensor faults with their plug in diagnosis tools. Whilst it will cost a bit, it will save you a lot of component changing and there are a lot of components to change on a Disco!

Posted on Jul 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset timing marks after replacing a broken timing belt?


Land Rover Freelander 2002-2005 KV6 Timming belt and ...

? 4:31
https://www.youtube.com/watch?v=sz_oe9tIFH4
Jul 3, 2011 - Uploaded by Jaime Depaula
Land Rover Freelander 2002-2005 KV6 Timming belt andreplacing valves - Video 2 ... shops in North Eastern USA for bent valves and timing belt change? .... Land Rover 200tdiTiming Belt -From Broken Belt to Retiming the ...

ROVER K Series Cambelt Change Video - YouTube

? 10:52
https://www.youtube.com/watch?v=1Qn8ljQKZxA
May 4, 2012 - Uploaded by metalworker007
How to change a rover K series cam belt .. by Technozen of ...soy espa?ol porfavor quiero saber timing marks de MG ROVER 25 petrol 1795cc engen .... Hi, Have a Land Rover Freelander1999 petrol serie K, that dont start, ...

Freelander 1.8i timing belt - Land Rover Technical Archive - LR4x4 ...

forums.lr4x4.com > ... > Tech Archive > Land Rover Technical Archive

Nov 20, 2006 - 1 post - ‎1 author
The following is instructions for replacing the timing (or camshaft) belt on the 1.8i petrol engine, as fitted to a Freelander. This is the K-series ... With the timing set, thecam sprocket marks should look like this. Posted Image

How to Replace timing belt on Land Rover Freelander 2.5 ...




Dec 10, 2015 | 2002 Land Rover Freelander

1 Answer

Over heating causes truck cut off, and will not turn back on until cool.


Do compression check to check for bad head gasket or cracked block or head

Apr 11, 2014 | 1996 Land Rover Discovery

1 Answer

I have an automatic 2002 Land Rover SE. When ever I turn on the A/C unit I smell anti-freeze, what could be causing this problem?


heater core will be the only reson the smell of antf is coming up
heater core can also triger engine light
core is inside suv passenger foot well

May 02, 2011 | 2002 Land Rover Freelander

2 Answers

I purchased a 2002 Range Rover Borrego recently.


I have experienced many electical demons with all my British cars. The nav units can and do fail. I had a goofy one this summer and the only way it got fixed was to replace it. The module not the head unit

Mar 24, 2010 | 2002 Land Rover Range Rover

1 Answer

Need to know how to time cams to crank


give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your SUV wish you the best of luck Michigan Man.

Jan 16, 2010 | 2002 Land Rover Freelander

1 Answer

2000 Land Rover Discovery Body Control Module erro 1668


you will need to have the code for the number of turns to activate the drivers side door lock ,so many left and so many right .or just get it taken to the dealers .

Nov 11, 2009 | 2001 Land Rover Discovery Series II

1 Answer

How do you change the alternator on a 2002 Freelander 2.5L


On the 2002 Freelander it is in deed tricky. Basically you will need to support the front of the engine as you will be removing the front engine mount in the process of removing the lower mounting bolt from the alternator. You will also need to work the belt off the pulley without damaging it as well. The whole job takes about an hour. Be certian that you have disconnected the battery prior to starting your job.

Dec 22, 2008 | 2002 Land Rover Freelander

Not finding what you are looking for?
2002 Land Rover Discovery Series II Logo

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77194 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...