1997 Toyota Tacoma Logo

Related Topics:

A
Anonymous Posted on Nov 20, 2015

I cannot get key out of ignition on 97 toyota tacoma unless i disconnect the battery ?

Can't remove ignition key unless I disconnect the battery

  • Brett Duxbury
    Brett Duxbury Nov 20, 2015

    Hi Anonymous, we want to help you with your question, but we need more information from you. Can you please add details in the comment box?
    what is the transmission set to when you cannot remove the key. Have you tried moving the transmission into Park or if a manual if may need neutral and hand brake on.

×

5 Related Answers

Anonymous

  • 154 Answers
  • Posted on Aug 04, 2009

SOURCE: 2007 Toyota Tacoma key fob

no.. u need to have a dealer do it.. they also have a tool ti check it the remote is transmitting a signal as well

Ad

Anonymous

  • 55 Answers
  • Posted on Aug 24, 2009

SOURCE: HELP WITH REPLACING STARTER ON A 97 TOYOTA TACOMA 2.4 MAN. TRANS

http://www.tacomaterritory.com/forum/

rtpflh

rtpflh

  • 546 Answers
  • Posted on Oct 10, 2009

SOURCE: how do i replace the key ignition on the column of

disconnect negative battery cable.remove upper & lower steering column covers.disconnect switch wiring connector. turn key to acc. release retaining pin through small hole in the side with a paperclip,slide key & cylinder out.re-assemble in reverse order.

Anonymous

  • 1752 Answers
  • Posted on Oct 23, 2009

SOURCE: the ignition key of my toyota 4 runner 1996, gets

You have a faulty "ignition key interlock" solenoid.

Anonymous

  • 10 Answers
  • Posted on Feb 21, 2010

SOURCE: The toyota Cmry engine won't stop unless battery is disconnected.

i have the same problem with my corolla 2002 I turn off the keys and put it out and the engine still running, I uplug the EFI fuse and the engine stop, I guess I need to replace the ignition.. or i'm wrong???

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2000 Toyota Tacoma. The key will not turn to lock. I have take the battery cable off, and then it will turn off.

Question edited into written English and even the name of the make and model!!
Question moved to make model category.

You need a good local auto-electrician. There are safety sensors and modules involved that allow you to remove the key. You are bypassing the lock solenoid by disconnecting the battery and cutting power to it to release it.

https://www.google.com/search?q=auto+electrician+near+me

..
0helpful
2answers

How to reset alarm on 2002 Toyota Tacoma?

Use the supplied key fob unless it is not factory fitted. If fitted by others, I would ask them to advise in the first instance.
0helpful
1answer

How to change fuel injectors on 97 Toyota Tacoma 4.0

The Toyota Tacoma has a fuel injector that mixes fuel with air. This technology almost completely replaced in the late 1980s and its programmable firmware allows the same hardware to be used with different fuels. A fuel injector is only a nozzle and a valve; it still requires a pump to inject the fuel into the engine.
  • Determine which fuel injector your Toyota Tacoma will need. This depends not only on the make and model, but also the engine size. Models made before 2005 may have a 2.4L, 2.7L or 3.4L engine. The current version may have a 2.7L or 4.0L engine.
  • Relieve the fuel system pressure and disconnect the negative battery cable with a socket wrench. Remove the engine under cover subassembly and drain the engine coolant. Detach the intake air connector and disconnect the throttle body motor assembly with a socket wrench.
  • Disconnect the fuel lines and remove the fuel pressure pulsation damper assembly with a socket wrench. Unplug the electrical connectors for the fuel and vacuum switching valve. Remove the engine wiring harness clamp and the air conditioning compressor clutch connector with a socket wrench.
  • Remove the two fuel rail mounting bolts with a socket wrench and lift out the fuel rail with the injectors still attached. Pull out the fuel injectors and discard the old gaskets.
  • Use new gaskets and install the new fuel injectors by reversing the removal procedure.
  • Fill the coolant reservoir with coolant of the proper grade and type. Start the engine and check for fuel leaks.
for the more details visit the link:
https://itstillruns.com/how-to-replace-fuel-injectors-in-toyota-cars-10152.html#how-to-replace-a-fuel-injector-in-a-toyota-tacoma
1helpful
1answer
1helpful
1answer

How to remove the starter from a 2007 toyota tacoma?

Hi,

1.Raise the hood of your Tacoma. Disconnect the negative battery cable with a wrench and isolate the cable away from the battery
2.
Raise the hood of your Tacoma. Disconnect the negative battery cable with a wrench and isolate the cable away from the battery

3.
Remove the nut securing the battery cable to the starter body with a wrench. Pull the battery cable off the post away from the starter. Pull the other wiring connection straight out of the connector.

4.
Remove the mounting bolts securing the starter body to the bell housing with a socket and ratchet. Support the starter body while you remove the mounting bolts, then pull the starter out of the bell housing.



Good luck!!!
1helpful
1answer

How do i replace the key ignition on the column of a 1995 toyota tacoma pickup, two wheel drive, 4cyl.

disconnect negative battery cable.remove upper & lower steering column covers.disconnect switch wiring connector. turn key to acc. release retaining pin through small hole in the side with a paperclip,slide key & cylinder out.re-assemble in reverse order.
1helpful
2answers

The toyota Cmry engine won't stop unless battery is disconnected.

i have the same problem with my corolla 2002 I turn off the keys and put it out and the engine still running, I uplug the EFI fuse and the engine stop, I guess I need to replace the ignition.. or i'm wrong???
0helpful
1answer

Key will not release from ignition switch in 2004 Toyota Tacoma

if its an automatic there could be a switch that will only let you remover the key when the gear shift is in park this switch could be faulty hope this is of help. regards John
39helpful
4answers

Need to remove ignition switch

remove shroud
insert key into ignition turn to acc you will see a hole at the underneath of ignition housing with key on push in pin and pull switch out
Not finding what you are looking for?

167 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...