Question about 1985 Chevrolet S-10 Blazer

1 Answer

Where does the map sensor go in a !985 Chevy S10 Blazer?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

On most models its on the air cleaner.

Posted on Jul 15, 2009

  • mrfixit90125 Nov 13, 2010

    there is none in 85 they used a carb no need 4 one

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need free vacuum line diagrams for a 94 s10 blazer 4x4


https://www.google.co.uk/search?q=vacuum+line+diagrams+for+a+94+s10+blazer&es_sm=119&tbm=isch&tbo=u&source=univ&sa=X&ei=RoJmVMLgN8fzasiagcgP&ved=0CCIQsAQ&biw=1920&bih=985#tbm=isch&q=vacuum+line+diagrams+for+a+94+s10+blazer+4x4&imgdii=_

Aug 29, 2014 | 1994 Chevrolet S-10 Blazer

1 Answer

93 s10 blazer with 4.3 liter vortec won't stay


You first need to run a fault code test on this engine, to do that go here.

Oct 10, 2012 | Cars & Trucks

1 Answer

'93 chevy S-10 Blazer 4wd (automatic) high idle & I have already replaced the idle air control/throttle positioning sensor & have checked for vaccuum leaks. (none of the above have fixed the...


dont know if this will help but have you replaced the coolant sensor (by the thermostat ) and the pigtail that connects it to the wiring also the map sensor may be part of the problem my 92 s10 did some what of the same thing and I replaced the temp sensor and that didnt fix it untill I put a new pigtail that connects to the wireing my son had a blazer that also did that I think ( its been a while ago ) and we replaced the map sensor and that fixed it

Sep 17, 2011 | 1993 Chevrolet S-10 Blazer

2 Answers

I have a 1989 chevy s10 4x4 4.3 fuel injected. It cranks right up and when I go to press the gas while in drive it wont go anywhere. It back fires and cuts out. what do you think it might be?


Probably a bad O2 sensor. Had the same problem with an 88 S-10 Blazer, I changed the MAP, MAF, and Idle sensors none of those fixed the problem, then I changed the O2 sensor and the truck ran like a champ.

Mar 30, 2011 | Chevrolet S 10 Cars & Trucks

1 Answer

What reading for map sensor chevy blazer s10 1989 2.8...what numbers?


CODE 33 MAP SENSOR SIGNALVOLTAGE OUT OF RANGE HIGH. CODE 34 MAP SENSOR SIGNAL VOLTAGE OUT OF RANGE LOW.

Jun 24, 2010 | 1992 Chevrolet S-10 Blazer

1 Answer

Will a 1985 S10 blazer tilt steering collum fit a


yepper! lol i have owed 5 of this geneation and both the s-10 and blazer are identical in the dash, engin and drive train

Jun 05, 2010 | 1988 Chevrolet S-10

1 Answer

I have 94 s10 blazer 4.3 the prob started the


throttle position sensor, or check to make sure you have vacume going to the map sensor. Alot of times the outlet on the throttle body gets plugged and there is no vacume at the map--causes it to die. unplug the throttle position sensor and then rev it up and see if its better.

Dec 04, 2009 | 1993 Chevrolet S-10

1 Answer

I have a chevy s10 blazer that will not start it


If you have good pressure to fuel rail, then you may want to check the voltage coming to each injector with a voltmeter.
You may also want to check and make sure that every cylinder is getting spark.
If you are getting spark and fuel, then you may have a bad sensor somewhere but the car should be put on diagnostic scanner to pinpoint exact problem location.

Aug 25, 2009 | Chevrolet Blazer Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...