Question about 2002 Ford Econoline Cutaway

1 Answer

2002 econoline van Check engine light on. Code: P0307. Has to deal with spark plugs. Fix???

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 103 Answers

That is a number 7 misfire. try replacing the plug and coilpack. you can also swap coilpacks with another and see if the code changes. I am assuming its a 4.6 or 5.4 engine. you can get away with just the coilpack and dont forget the boot also. get only oem ford parts. probably cost about 120-150 dollars. did water get in it? can you erase the code or is it a hard fault? I try with info I have,sorry

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

2000 Jeep Grand Cherokee Laredo 4.7 liter code reads p0307 turn the car off when I turn it back on started misfiring and sputtering and wont stay started now help


code p 0307 is misfiring on no 7 cylinder ====causes --- engine mechanical fault ---wiring---ignition/ fuel system--injector --ECT/MAF sensor---ECM
look for low fuel pressure or ignition control module

May 31, 2016 | 2000 Jeep Grand Cherokee Laredo

1 Answer

Whats a common fix for cylinder # 7 misfire on a 2007 ford e250 4.6L


Pull the coil from the plug, Remove the spark plug and inspect for any moisture in the plug hole. If you see a black line down the side of the plug. Called carbon tracking, replace the plug. To see if coil is firing move it to another hole and restart. ford's misfire monitors are fun to set. Takes up to 45 minutes to get them to pick up under specific conditions. Good Luck.

Jan 16, 2013 | 2007 Ford Econoline

1 Answer

I have a 1989 ford econoline van that will start. The engine will turn over but will not start. Please solve.


Let's start with the simple things - are you getting spark?
To check - you will need a friend to try to start the van - and you will
1- pull an EASY plug wire to get to - doesn't matter much which one.
Try holding the wire about 1/4 inch away from the cap while your friend trys to start the van. Do this in a NON well lit area - shadows will help tell your eye if it is sparking or not. In BRIGHT light you will not always see the spark if you're not trained.
Get back to me with if it sparks or not.

Nov 27, 2011 | 1988 Ford Econoline

1 Answer

My 93 ford econoline van it turns over but it does not starts


Possible clog fuel filter. Bad spark plug or wires.( usually spark plugs so check them first, oily, damage, dry, spark Etc..) Check engine oil if there's any mix with coolant. Check air filter. Battery must be fully charge( sometime it may turn but not fast enough)

Nov 02, 2010 | 1993 Ford Econoline

2 Answers

PO307 check engine code. i have changed spark plugs, ignition coil and ignition wires. Still cant figure out problem


Causes: A code P0307 may mean that one or more of the following has happened:
* Faulty spark plug or wire
* Faulty coil (pack)
* Faulty oxygen sensor(s)
* Faulty fuel injector
* Burned exhaust valve
* Faulty catalytic converter(s)
* Running out of fuel
* Poor compression
* Defective computer

Possible Solutions: If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.

If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

Hope this helps (remember to rate this answer).

Oct 28, 2010 | 2003 Cadillac Escalade Esv

1 Answer

2001 ford e250 service engine light is on. computer shows cylinder #7 misfire code.


A code P0307 Cylinder #7 Misfire may mean that one or more of the following has happened:

Faulty spark plug or wire
Faulty coil (pack)
Faulty oxygen sensor(s)
Faulty fuel injector
Burned exhaust valve
Faulty catalytic converter(s)
Running out of fuel
Poor compression
Defective computer

POSSIBLE SOLUTIONS:
If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.

If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

Jan 10, 2010 | 2001 Ford Econoline

1 Answer

My engine light is on, codes show P0307 and P1740 the truck runs fine and the a/c blower goes from vent to defrost when I accelerate and back again when i let off the gas and cruise


A P0307 code means that the the car's computer has detected that one of the engines
cylinders is not firing properly. In this case it's cylinder #7.


Symptoms may include:
  • the engine may be harder to start
  • the engine may stumble / stumble, and/or hesitate
  • other symptoms may also be present
A code P0307 may mean that one or more of the following has happened:
  • Faulty spark plug or wire
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector
  • Burned exhaust valve
  • Poor compression
  • Defective computer

Jul 15, 2009 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

03 Dodge Ram 1500, P0307 code, check engine light


Try this:

Dodge 1995-1999 V8 spark plug wiring.

http://dodgeram.info/tsb/1998/18-48-98/18-48-98-v8.htm

Jul 01, 2009 | 2004 Dodge Ram 2500

2 Answers

1996 f150 5.0L misfire code


P0307 Code - Cylinder #7 Misfire Technical Description Cylinder #7 Misfire Detected
What does that mean? A P0307 code means that the the car's computer has detected that one of the engine's cylinders is not firing properly. In this case it's cylinder #7.
copyscape.gif SymptomsSymptoms may include:
  • the engine may be harder to start
  • the engine may stumble / stumble, and/or hesitate
  • other symptoms may also be present
Causes A code P0307 may mean that one or more of the following has happened:
  • Faulty spark plug or wire
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Running out of fuel
  • Poor compression
  • Defective computer
Possible Solutions If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.
If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty

Jan 14, 2009 | 1996 Ford F150 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...