Question about 1966 Ford Mustang

Open Question

1969 mach I mustang, passenger door won't open

Passanger door won't open (unlatch), window is open, lock is unlocked, tried both outside thumb switch and inside finger latch

any hints ?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75797 Answers

SOURCE: Single power door lock does not work

If it doesn't work from master switch then the door lock motor actuator will need to be replaced, this requires pulling the door panel.

Posted on Sep 20, 2008

  • 31 Answers

SOURCE: Seatbelt Unlatches

This sounds like something broken in the latch. Do yourself a favor. Before it comes unlatched in an accident, go to your local dealer and get a replacement latch ASAP. That is one device in a car you shouldn't ever have to question. If it doesn't work right, replace it.

Posted on Feb 06, 2009

  • 1 Answer

SOURCE: Door won't unlatch or come open

Ford had a problem with the door handles not working properly. They are cheap plastic. If the exterior door handle is broken, you will need to drill out the rivets that hold it in, and then get the door open and the panel off. You have to disconnect the rod going to it. Then, remove the handle. If you don't want to drill again, I suggest replacing the rivets with a bolt and nut easily obtainable at your hardware store. I've found that a M7 bolt works very well. If you are having a problem with the interior door handle, it's the same problem. Remember to check your door latch because if your exterior handle is broken, then your latch isn't working properly. I got one at Ford for about 40 bucks.

Posted on Mar 07, 2009

  • 1 Answer

SOURCE: 1969 ford mustang mach 1 brake / stop light switch challenge

I installed a new turn signal switch in the steering column, and it fixed my brake light problem. Evidentally the turn signal and brake light wires use the same plug wires. It cost about $70. I would suggest doing this.

Posted on Mar 31, 2009

mcgyver468
  • 710 Answers

SOURCE: 2002 sienna right sliding door will not close

Hold the door handle in the open position while using a bent coat hanger on the door catch lever.Sometimes a flathead screwdriver works to pry the door catch as well. Good luck, keep me posted.

Posted on Apr 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Passenger door can be opened from inside but not from outside...how too fix???


Remove the door lining and look inside by the lock. There is a linkage that has come adrift. To remove the door lining, remove handles, escutcheons, and arm rests. Using a wide blade screw driver gently pop the plastic rivets that hold the lining to the door.

Dec 02, 2015 | Cars & Trucks

1 Answer

Opening the drivers door doesnt automatically open the passangers door


Some vehicle locking systems allow a single button press to unlock the driver's side door and require a second button press to unlock the passenger side door. Likewise, use of the key to unlock the driver's side door does not automatically unlock the passenger side.

Mar 25, 2014 | Dodge Stratus Cars & Trucks

1 Answer

I have a Honda Odyssey 2001. The car's front passanger door can not be opened from outside. Remote control lock and unlock function is ok and the door can be opened from inside. Can you suggest wh


you have to take off the door panel and look. most often the linkage comes off of the outside handle; sometimes something is broken. It will be a mystery no more when you remove the door panel and look.

Mar 03, 2013 | 2001 Honda Odyssey

1 Answer

Power window open partially with inside or outside


inside the mechanical lock (The part that actualy holds the door shut when you close it) there is a switch that informs the control unit that the lock is either locked or unlocked.
These switches fail sometimes, when this happens the control unit is not aware that you have opened the door, and therefor will not wind the window down slightly.
The switch is integral with the lock unit, and they are not easy things to replace either.

Feb 20, 2010 | 2003 Volkswagen New Beetle Convertible

1 Answer

Front passanger door not opening on central locking


My 1998 passat done the same, try remove the drivers side window/childlock control on the armrest and clean the multipoint switch as that got my drivers side door opening/closing on the fob as well as the passenger rear door unlocking and working again as it was deadbolted and would not open inside or out.

Jan 19, 2010 | 2006 Volkswagen Passat

1 Answer

Cant open passenger door lock broken


in my 2007 volkswagen passat, the passanger door, can't bee unlock with the key or from the outside.

Oct 17, 2009 | 1998 Volkswagen Passat

1 Answer

Jeep grand cherokee central locking system


If all the doors do not lock or unlock when using the passenger side switch, then the switch itself is probably bad.   If the passenger side switch locks or unlocks all the other doors except for its own, then the power lock solenoid inside the door is bad or jammed.  If it is jammed, try locking and unlocking the door manually while activating the switch to work its way free.

Dec 13, 2008 | 1996 Jeep Grand Cherokee

2 Answers

1969 ford mustang mach 1 brake / stop light switch challenge


Most tail light problems are a result of a bad ground......somewhere.

Sep 16, 2008 | 1966 Ford Mustang

1 Answer

92 F150 power window and locks


try taking apart and cleanig all contacts first. make sure you are getting power to switch. Sounds more switches are going bad. They usually last about 5 to 7 years before they start going out.

Jun 11, 2008 | 1992 Ford F150 SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...