Question about 2003 Dodge Ram Maxi

1 Answer

03 ram 2500 blower will not work at all changed blower, resitor and control still nothing all fuses are good

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    Visited the website for 3 consecutive days.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 151 Answers

Check the connector that attaches to blower resistor. For a melted plug, corroded terminal and wiring. This is a very common with problem.

Posted on Jul 14, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

99 tl. Blower motor relay is not being energized. The blower motor does run when i the relay block. Is the Climate Control Panel bad?

check the fuse also when changing the resitor you have to take the fuse out and disconnect the battery

Dec 02, 2012 | 2003 Acura 3.2TL

1 Answer

Got a 2007 2500 dodge p'u the blower doesn't blow at all , is it a fuse and if so what fuse is or is it something else

start by dropping the blower from the air box. the blower is located under the dash above passenger floor board. if there is nothing binding the blower then check the blower with 12 volts be sure to have a good grip in the motor it has some torque on it. if blower checks out then move to the fan switch by the way the only fuse is the one located under the hood marked hvac

Feb 11, 2011 | 2006 Dodge Ram 2500

2 Answers

Blower motor not working at all. 2003 ram van. checked, fuse, resistor, switch, power at the motor

the resitor operates ground, if theres no power then its a bad fuse under the hood in the power fusebox, or #10 fuse inside the leftside of dash, power for the blower comes from the ignition switch,double check all fuses,if you had no ground to blower then i would say the resistor,make sure you have a good ground on the test light, then check for power with key on again, heres a wiring diagram to help you, good luck.fd18d13.gif

Mar 23, 2010 | 2003 Dodge Ram Maxi

2 Answers

Front blower motor stoppeed workin, replaced teh relay and fuse in the fuse block. Still have nothin

you wont till you replace the blower motor it self i owned a few of them and the blower motors do go out without any notice

Jan 15, 2010 | 2005 Dodge Grand Caravan

1 Answer

2006 mercury montego blower motor control does not work conected wire to blower motor and pluged into lighter blower worked on high tried another module but still didnt work checked all fuses they are...

replace the blower motor resistor. follow the wires from the blower motor to the resistor. the resistor controls the speeds on the blower. this is a very common problem in the winter time do to condensation coroting the circuit board on the resitor

Jan 15, 2010 | Mercury Montego Cars & Trucks

2 Answers

I have a 1996 Acura Integra. The blower moter will

Check all your fuses.( you probably did, but do it again, one at a time) it seems like your control pannel is not getting power. See what wire is the power for the control pannel and bypass it with a jumper wire, giving it power and see if the blower works. Be careful though, make sure you find the correct wire that powers the control, or else you'll burn the control.

Nov 30, 2009 | 1996 Acura Integra GS-R

2 Answers

1997 Dodge ram 2500 deisel. Blower fan wont come on. replaced climate control module and fuse is ok. Is there an inline fuse or relay I'm missing?

if the fuse is ok your next step is to see if you have power at the heater fan switch,if you do then the next thing is the heater blower motor resister it is under the heater assembly,that is what gives you different speeds,
the last is test for power at blower motor to see if it is faulty

Nov 21, 2009 | 1997 Dodge Ram 2500 Club Cab

2 Answers

Blower works on all speeds but minimal air comes out

youve got a bad blower motor resister. buy a haynes manual and the resistor and have a windy day again.

Jun 05, 2009 | 2004 Dodge Ram 2500

Not finding what you are looking for?
2003 Dodge Ram Maxi Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides