Question about 1998 Ford Ranger SuperCab

1 Answer

Special bleeding procedures/94 ford ranger/clutch master cylndr

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 148 Answers

Nothing special about it sometime it takes forever you could have somone pump the peddle 5 or 6 times and hold it while you open the bleeder screw that may help to force some of the air out

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to bleed a cluch on a 1993 ford ranger 4.0 5speed


this is a two person operation. pump the clutch pedal and hold down Open the bleed screw at the slave cylinder . Allow air out and close off. pump the pedal and hold down . open the bleed screw and let air out ---repeat this operation procedure until you get solid fluid out of the bleed screw. Keep an eye on the reservoir level and keep topping as necessary or you will have to start again. If you cannot get the air out of the system after say 5 minutes check your procedure or replace the clutch master cylinder.

Jul 15, 2014 | Cars & Trucks

1 Answer

1998 Ford Ranger Truck Clutch problems


I remember a problem with the Ranger Series involving the hydraulic assisted clutch. There was a special refill procedure for a few Year Models. If the hydraulics leaked during storage an air bubble could occur and they are next to impossible to get fresh fluid back to fill the void. And it would not fix the leak.

I remember a video showing all the components fastened to a display board to train Mechanics on the extra effort needed to bleed this system.

I would say to search the Web under a topic like "Ford Ranger hydraulic clutch bleeding" to find the article. Even if you replace the current clutch cylinder, it may be no less difficult to refill. Your mechanic may need the info you find.

Mar 19, 2014 | 1998 Ford Ranger SuperCab

1 Answer

How to bleed 89 ford ranger 4x4 clutch


there is a bleeder screw by the transmission slave cylinder that you bleed the air out.just pump the clutch pedal a few times hold the pedal to the floor and have someone crack open the bleeder screw to bleed the air out then close it and repeat.make sure the master cylinder for the clutch doesn`t go low.

Nov 02, 2011 | 1989 Ford Ranger

1 Answer

2004 ford ranger 4 cyl. Problems bleeding clutch after master cyl replacement


Use a vacuum pump and fake cap o nthe master cylinder reservoir to pull the system into a vacuum while not pressing and then while pressing the clutch to extract the air.

Oct 06, 2010 | 2004 Ford Ranger

1 Answer

Hi I have a 2000 model ford ranger 2500 diesel


open the bleed screw on the slave cylinder ,whilst a good looking long legged assistant push the clutch pedal down and you open the bleed screw..If this still doesnt work then check the clutch arm trhow and see how much its moving ,could be you need a new master cylinder

Mar 17, 2010 | 2000 Ford Ranger SuperCab

2 Answers

How hard is it to replace a clutch master cylinder on a 98 ford ranger 4x4, 4.o engine. Any special tools required?


install new clutch, new clutch master cylinder bleed real well all new parts and still unable to put in gear clutch peddel real soft no pressure at all. what i'm I doing wrong?

Mar 07, 2010 | 1998 Ford Ranger SuperCab

3 Answers

How to bleed a clutch in a ford ranger


http://www.therangerstation.com/tech_library/bleedclutch.htm

Dec 07, 2009 | 1995 Ford Ranger Supercab

4 Answers

No clutch pedal been bleeding it for 3 days. i have replaced the slave cylinder, clutch and clutch master cylinder. its a 1994 ford ranger 2.3L 5speed


On a Ford Ranger you need to have the clutch master cylinder facing up when you are looking at it mounted on the vechile it is pointing down you need to have it facing up and also have a bleeding tool I went out and bought a POhoenix Injector which makes it real easy and you can do it buy your self. Good luck

Dec 06, 2009 | 1994 Ford Ranger Supercab

1 Answer

Need to know how to bleed clutch for 1995 ford ranger


Does the clutch have the outer clutch slave or is it inside the clutch plate area, to know look on the left or right side for a clutch slave cylinder if it does not have one it's internal and a pain. If it has an out side one fill the master reservoir then go under the truck and crack open the bleed valve on the cylinder have someone pres the clutch pedal all the way down and hold it to the floor, then close bleed valve then allow the clutch back up and have them push it to the floor open bleed valve and close when all air comes out do this till the arm moves it's full travel about 2 inches. And if its one with a master inside the transmission it has to be power bleed and normally you can’t do it without pulling the transmission.

Jul 23, 2009 | 1995 Ford Ranger Supercab

1 Answer

1996 Ford Ranger XLT Clutch Bleeding


The problem is up at the Master Cyl............It comes ou of the firewall and points DOWN at about a 45 deg angle.....The reservoir is remote and the hose is set to the lowest point of the cyl...........The tube TO the slave is 180 deg around facing bottom...........
Take the master cly OFF the firewall.......tilt it so that both inlet and outlet are the HIGHEST point of the cyl........Gravity bleed or vacula the slave.........then reinstall the master
I know it sounds like a lot of work but it's the easiest way to clear the air out of Ranger/Explorer hydraulics

Aug 11, 2008 | 1996 Ford Ranger SuperCab

Not finding what you are looking for?
1998 Ford Ranger SuperCab Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...