Question about 1993 Ford F150 SuperCab

1 Answer

Truck start idle but shut off when put in gear will run at low speed then shutoff when i excelarate

Posted by on

  • apyepye Jul 14, 2009

    fuel pump and filter location

  • apyepye Jul 14, 2009

    fuel pump and filter location and tps sensore

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,036 Answers

YOU GOT RESTRICTED FUEL FILTER OR A FAULTY FUEL PUMP.SCAN IT CHECK THE TPS SENSOR.

Posted on Jul 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my truck shut off when put in gear, does not idle runs normal


Hi Im AL the owner of Big As Auto Repair.

Most likely the "IDLE SPEED MOTOR" is stuck or not working at all. Here's what I want you to do. Start the engine and let it idle, then take something like a small hammer and tap on the idle speed motor several times, then put it in drive and see if it dies. If it keeps running normal, then replace the Idle Speed Motor. Hope this helps and please visit my auto-repair-website here: http://www.bigasautorepair.com/

Dec 22, 2015 | 2003 Dodge Ram Pickup 1500

1 Answer

My 1994 5-speed manual Pathfinder sputters and jerks when it's cold


Here are the common cause of surges, stalls at stops, slow idle speed, erratic idle, it is in most cases the idle speed control air-bypass valve and/or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving

Mar 22, 2014 | Nissan Pathfinder Cars & Trucks

1 Answer

2008 Sprinter stalls at idle when in gear


2506 PCM/ECM Power input signal range/performance
110 IAT Intake Air Temp sensor 1 circuit
104 MAP/ Baro sensor low input
You probably did do some damage by not isolating the engine and controls out before the repairs/mods were started.

Jun 11, 2013 | 2006 Dodge Sprinter

1 Answer

1996 mercedes c280 dies when put in drive


Engine stalls or RPM fluctuates at idle up and down or dies near idle.

This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve but always run a OBD2 fault code as well as the cleaning procedure. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control

Oct 15, 2012 | 1996 Mercedes-Benz C-Class

1 Answer

I have aVW jetta 4, 2.0 highline, 2001 that stalls engine at low gears. The situation becomes worse when the aircon is on.


Engine stalling issue at low speeds

This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve. Buy a can of throttle valve cleaner from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control



Jun 08, 2012 | Cars & Trucks

2 Answers

I got a Jeep Wrnagler 1989 5 speed 2.5 liters when it starts it idles high and idles real low


Seems like you got a fuel pressure issue.Bogs down in 3rd. .Then idle high and low.Also check the MAP sensor its up along the firewall.Make sure the hose and electrical is connected,

Feb 27, 2012 | 1994 Jeep Wrangler

1 Answer

93 Lincoln Conti. Runs rough in gear


Probably a bad idle air motor, it controls idle electronicaly

Aug 30, 2009 | 1993 Lincoln Continental

1 Answer

When i start my 1997 Geo Metro, it often sputters


Try this
Here are the most common causes of surges, stalls at stops, low erratic idle speed, rough idle and engine hesitation, it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Apr 03, 2009 | 1997 Geo Metro

1 Answer

Engine will shutoff at low speeds and turning does it sometimes


Sounds like a dirty or faulty, IAC motor. (idle air control motor) It controls your idle speed under load, so vehicle doesn't stall at stop signs etc. Turning wheel, heater on, ac on etc, are all load conditions that it controls the idle for. Have had good luck at removing it, spraying it & port it comes out of on throttle body, with throttle body cleaner, and re-install. Some will take quite a while before they act up again, or may last a week or 2. if it does cure it, and it starts doing it too frequent after cleaning, replace it.

Mar 08, 2009 | 2005 Dodge Durango

Not finding what you are looking for?
1993 Ford F150 SuperCab Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...