Question about 2001 Ford F250 Super Duty Super Cab

1 Answer

Running lights on the trailer no longer work, no power to the plug where the tailer loom cuts in.

Posted by on

  • Mike Butler
    Mike Butler May 11, 2010

    Is it not just plugged in to 7 way or whatever plug in bumper or in box? Running lights on truck are working?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Check the trailer fuses under the hood in power dist. box on the driver fender they're not the same as the truck

Posted on Jul 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 TOYOTA COROLLA WANT TO WIRE UP THE SEVEN PIN TRAILER PLUG TO MY TOYOTA 2.0 D4D LITRE COROLLA


the secret here is to buy a trailer harness for the vehicle ( available from most tow bar supply and fitting shops )
it is a set that just plugs into the existing harness at the rear light assembly ( piggy back arrangement)
from there you wire the male and female plugs as per the color code that is on the paper that comes with the units
saves cutting into the car harness and causing real electrical problems

Jul 03, 2016 | Toyota Cars & Trucks

1 Answer

Problems with bosal towbar wiring kit....


bosal kits
claim to be plug and play to your vehicle
no wires meant to be cut
the wiring instructions might be generic and not truly specific to your C-Max
save time
wire in indicators old school
pick up the left and right indicator wires at the back of the car
make sure there is a good earth on the 7 pin plug

Mar 07, 2017 | Cars & Trucks

1 Answer

I tow an enclosed trailer with my 2002 freelander and the brake lights don't work on the trailer. I have the proper connector which works fine for the turn signals, the hazard flashers and the overall...


If the Brake light filaments in the globes are OK then you could have a bad connection some where in the brake light circuit from where the trailer connector cable is tapped into the vehicle wiring loom.
Start by disconnecting the trailer connector and checking on the vehicle socket for an indication that voltage is present by using a multimeter or test lamp while the brake pedal is pressed. If not OK, then the fault is either where the brake light wire is screwed into the socket or the connection in the vehicle wiring loom.
If OK then reconnect trailer plug and after removing cover, check the trailer plug where the brake light wire is screwed into it. If OK, then check where wire is connected at trailer lamps. If not OK, then there is a broken wire in the trailer cable.

Sep 27, 2010 | 2002 Land Rover Freelander

1 Answer

When I hookup the brake lights come on.,,,I had the trailer come off the ball and pulled the cord out as well as the break away ,,, I replaced the plug on trailer as well as the receptal on truck. tried on...


When the trailer came off and pulled the light cord it stretched or broke wires inside the trailer harness. Start tracing back from the plug, paying careful attention to sharp bends and hold down points as well as connections. Remember that wire could pull apart inside the insulation without breaking it. It might be just as easy to replace the tailer harness. Hope this helps.

Jan 15, 2010 | Dodge Pickup Cars & Trucks

1 Answer

No trailer lights. No power at trailer plug. Where is the fuse?


Trailer lights are normally linked or wired direct from the original circuits,ie:lights/turn/brake etc.,and are checked one by one when operating that curcuit, and therefore there is no specific fuse for it .

If all lights on the vehicle are otherwise working, you will have broken wires/connections between the plug and the loom.

Please leave fair comment if I have helped you.

Thank you

Sep 01, 2009 | 2005 Ford Expedition

2 Answers

Tailer running lighs dont work


easy fix.... find the wire that goes to the LICENSE PLATE LIGHT and splice into it and run a new wire to the running light wire for the trail.. it will be very close the the Trail harness

Jan 19, 2009 | 2006 Ford F-150

3 Answers

Car electrics


you do not need a relay if you are only running it for the trailer lights and DONT cut any wires on you focus loom use what they call scotch locks

Jun 20, 2008 | 2005 Ford Focus

Not finding what you are looking for?
2001 Ford F250 Super Duty Super Cab Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...