Question about 1989 Ford F 150

Open Question

1989 Ford F150 - electric window/lock wiring diagram

Need a diagram for the wiring of the electric windows and locks on the driver's side of my 1989 Ford F150. It's a Supercab XLT Lariat 2WD with the 5.0 engine.

The buttons on the driver's side will lock/unlock the passenger door and roll up/down the passenger window, but have no effect on the driver's side. The lock button on the passenger side has no effect on the driver's side either. Have tried trading out the switches.

Thanks.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: 92 F150 power window and locks

try taking apart and cleanig all contacts first. make sure you are getting power to switch. Sounds more switches are going bad. They usually last about 5 to 7 years before they start going out.

Posted on Jun 11, 2008

Ad
chiquititas
  • 1010 Answers

SOURCE: truck that wont start

Here is a link that might be relevant for your problem although its Mazda truck, but give it a shot:
http://www.fixya.com/support/t659042-truck_start

Posted on Jun 23, 2008

freetek
  • 5568 Answers

SOURCE: 1996 ford explorer

Because this problem is the result of the attempted break-in, it is probably not possible to troubleshoot the electrical mixup without a diagram of the entire system. I recommend you buy a Haynes or Chilton aftermarket service manual which will have the diagrams needed to trace the wiring and put it back in order. These are available in any auto parts store at a cost of $18-$30 US and you will find it useful for other problems too since they are nearly as complete as the factory manuals and often have much better photos and illustrations since they are aimed toward us, the owner, not the factory trained mechanic.   

Posted on Sep 23, 2008

ManiacZack
  • 14 Answers

SOURCE: location of alternator 1986 ford f150 xlt lariat

Well first have you charged your battery back up, if so then try to by pass the ingintion switch by just connecting the two main post of the colenoid with a piece or wire, this creates a direct wire basically from your battery to your starter, if still no luck you will need a new starter located more to the drivers side close to right under the pedels on the bottom side of the truck.

Posted on Oct 06, 2008

jpstuhr
  • 49 Answers

SOURCE: Fuse Box Diagram

Here ya go

374669b.jpg

Posted on Feb 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause the power windows and power locks to respond slowly, as well as the gauge lights to be dim on a 2000 Ford Explorer?


Electrical ground issue possibly . High resistance in the electrical circuit . Do you know anything about automotive electrical trouble shooting , voltage drop testing ? How to read an use a wiring diagram to pin point testing points in a electrical circuit ?
Mastering Voltage Drop Testing with Pete Meier and Jerry Truglia
Electric Testing Techniques You Need to Know
The Trainer 32 How To Read An Automotive Block Wiring Diagram
Free wiring diagrams http://www.bbbind.com/free_tsb.html Enter vehicle info. year ,make , model , engine . Under system click on Body & Accessories , then under subsystem click power locks or power windows . ? which ever you want to start with ! Watch the voltage drop testing video , get yourself a DVOM an test the circuit to see which side has the problem .


May 08, 2017 | Ford Cars & Trucks

1 Answer

Passenger Power Window Switches Do Not Function


All the wiring for all the windows flow through the master switch...both power and ground. So the problem is most likely a bad master switch or a broken wire in the hinge area of the driver's door. Get a wiring diagram and check for power and ground coming to the switch. If so, then the switch is most likely bad. Read this post http://ricksfreeautorepairadvice.com/window-goes-up-but-not-down/

Aug 16, 2017 | 1989 Nissan Maxima

1 Answer

I need a wiring diagram for the power window switchs on a 1989 Ford F150 pickup My windows will work with the ign. switch is off


Sounds like a faulty ignition switch. Especially if any other accessories stay on as well with key off.

Jan 15, 2011 | 1989 Ford F 150

2 Answers

No power of windows or locks from 2005 F150 driver side control


are the lock motors bad?the rubber around them dry up and allow water in them.

Oct 13, 2009 | 2005 Ford F-150

1 Answer

Electric window 1991 F150 ...351


If the lock is trying to move, like you hear it but nothing really happens, replace the door lock actuator. i believe the windows are on the same fuse. Try removing the interior door trim and tap on the window motor lightly with a small hammer while holding the switch. If the window moves, replace the motor. If not, check for power and ground at the connector. If you have power and ground (which switch when going up then down) then replace the motor. If you dont, repair the circuit.

Aug 04, 2009 | 1991 Ford F150

1 Answer

Electric windows not working


i would look for a blown fuse

Mar 27, 2009 | 1987 Suzuki Samurai

1 Answer

My electric windows and automatic seat belt do not work


Its time to stop being afraid of the unknown. there is no doubt that you will need to remove the inner door panel to access the electrical modules behind the buttons. https://www.youtube.com/watch?v=p2_f7NkjH8E hope this helps.

Oct 13, 2017 | 1989 Toyota Camry

1 Answer

1989 Ford F150 power window


you have to disconnect the negative side of the battery so you won't kill it then remove the door panel look for hidden screws behind the arm rest and behind what looks like little doors that you have to use a screw driver to open once that is removed you will find a plastic sheet just cut and peel this back (you can use duct tape to replace it when you are done) also put on gloves because inside the doors there is sharp edges, you then can see the motor and you will need to break off the rivets but you can put the new one on with just a small bolt and nut and use lock tight

Jan 05, 2009 | 1989 Ford F 150

1 Answer

Windows will work only from driver side controls


I solved the issue by taking the switch apart and soldering a jumper across the contacts for the window lock. Even though the window lock is no longer functional....my wife is happy she can roll down here window.

Sep 27, 2008 | 2003 Ford F150 Regular Cab

1 Answer

92 F150 power window and locks


try taking apart and cleanig all contacts first. make sure you are getting power to switch. Sounds more switches are going bad. They usually last about 5 to 7 years before they start going out.

Jun 11, 2008 | 1992 Ford F150 SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

995 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

81423 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...