Question about 2001 Isuzu Rodeo

1 Answer

When starting car, takes 8-10 sec to turn over.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Do you mean 8 to 10 seconds to START? Turn over means the engine is turning or cranking BUT starting is when the engine is actually running. I think you might have a fuel problem like your loosing your prime. Turn the key off wait 15 sec. then turn the key ON not cranking it repeat this (3x) if the car starts immediatedly your fuel pump is loosing its prime or the fuel pressure regulator is leaking.

Posted on Jul 31, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How do i fix the car when it keeps flashing economic mode active

look on youtube you will get your answer there

Apr 02, 2015 | 2002 Peugeot 307

1 Answer

Reset security system on a 2004 cheve

-get battery charger, procedure will make car go dead.
-turn on ignition w engine off
-attempted to start then release to on
-after 10 mins sec light should turn off
-turn off wait about 5 sec
-repeat steps 2 more times for 3 cycles/30 mins
-last step off to crank (i would hook up cables to another car before i did last step so that the dead battery had more then enough juice to start, if battery still kinds dead and doesnt start u have to do procedure all over again.
-if u have the money u can just take car to dealer and have them do a scanner that'll reprogram system

Apr 04, 2014 | 2004 Chevrolet Impala

1 Answer

Car taking longer to start

Diesel or petrol? if diesel try some good fuel system cleaner before the service so any dirt or moisture is gone before new filters fitted!!
Petrol use good petrol BP ESSO TEXACO they have the best additives which protect injectors pistons every thing you need to keep good. My s4 only ran properly on these fuels.

May 14, 2013 | Renault Espace Cars & Trucks

1 Answer

2004 yukon xl. It takes 2 attempts to start. Need an idea why. Thanks.

turn to on position,, just wait 1 sec for pressure to build in fuel lines then turn to start

Apr 22, 2011 | 2003 GMC Yukon XL

1 Answer

Car starts and turns right off

put the key into the trunk lock and turn/hold over to the left OR put the key in the drivers door and hold over to unlock,windows go down.wait 30 secs then turn/hold over to lock,windows go up,wait 30 secs then press the unlock button for 30 secs on the remote,then try starting the car.

Jan 08, 2011 | 2000 Volkswagen Beetle

1 Answer

I have 2006 dodge charger and when i turn the key to start the car, it takes 3 to 5 sec and then the car when turn on... everything turns on when i turn the key and then 3 to 5 sec later the moter turns...

Hi you will have a problem with the transponder signal retreiver. this is the component that tells the computer that the correct key is in the ignition. you will have to take it to a dealer to get it checked. Cheers Ben

Aug 08, 2009 | 2006 Dodge Charger

1 Answer

Acceleration problem

Buy a can of throttle body cleaner, about $3 from walmart. Take off the air cleaner, and I'm sure you will see a whole bunch of black **** inside the throttle body, where the air is sucked inside the intake manifold. With the engine off, advance the throttle with one hand, this will open the butterfly valves inside the body, and you will be able to see down the throat. It will be gummed up with black goo. You have to spray the dual throats down for about 5 seconds then take an old tooth brush and scrub gently on the moistened goo, for about 20 secs. then spray more cleaner for another 5 secs until you can see bright shiny metal. only spray for about 10 secs total. Then start the car, it will be hard to start for about 3 secs, then it will start up, let the idle stabilize, then turn it off, and repeat the process till its all shiny inside!

Aug 24, 2008 | 1994 Cadillac DeVille

Not finding what you are looking for?
2001 Isuzu Rodeo Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

75797 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides