Question about 1989 Honda Prelude

1 Answer

How to change an alternator on a 1989 honda - 1989 Honda Prelude

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,124 Answers

Disconcet the positive cbl on batery..
Disconect plugs & wires from alternator..
Loosen the belt.
Undo bolts..
Pull out alt..
Put in the new alt..
Tighten bolts & belt.
Plug wires back in..
Re-conect cbl to batt..

Hope this helps !!
rate me good ;o)

Posted on Jul 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 1990 prelude will not charge the batt while driving and batt light is on


you will need a new alternator. battery light means there is no charge in the electrical system. always first check the earths and wires before changing the alternator as a faulty earth can also be the main problem.

Oct 10, 2013 | 1989 Honda Prelude

1 Answer

1989 honda prelude check engine light on and won't hold charge


change the battery cables terminals you can get them at walmart for under 5 bucks last time I checked

Sep 29, 2012 | 1989 Honda Prelude

1 Answer

I have a 1989 honda accord lxi, I am having troble removing the alternator. I got it loose but I cant get it out.


that is a tricky one i also have a 89 honda accord and i replaced my alterater as well i turn it sideways and removed it the bottom side took a while but didn't have to take any extras off

Aug 17, 2010 | 1989 Honda Accord 4 Door

2 Answers

1989 honda civic runs but when you turn lights on car stalls out. Have checked alternator, fuses.


CHECK ALTERNATOR DRIVE BELT TENSION.MAKE SURE IT NOT TOO LOOSE.AND CHECK YOUR IDLE SPEED.IT SHOULD BE 700 - 800 RPM.IF IDLE SPEED TOO LOW ALTERNATOR WONT TURN FAST ENOUGH.BUT CHECK ALTERNATOR OUT PUT AT BATTERY.IT SHOULD BE 13.5 TO 14.5 VOLTS.IF NOT PROBLEM IN ALTERNATOR.CHECK ALTERNATOR FUSE AND ITS BATTERY FEED WIRE AND VOLTAGE REGULATOR WIRES.

May 30, 2010 | 1989 Honda Civic

1 Answer

1989 honda crx hf electric problem


the wiring harness rubs in half. trace the wires from the alternator back. Under the intake manifold about middle ways you should find the broken wire.

Apr 13, 2010 | 1989 Honda CRX

1 Answer

Replacement of Alternator on 1989 Honda Prelude


Very difficult indeed. Try 1/4 drive ratchet or 12mm box end wrench--bottom bolt goes through the adjuster-really can't see it-slow go but do able

Feb 05, 2010 | 1989 Honda Prelude

1 Answer

Honda Accord 1989 part that converts ac to dc


The alternator.
It should produce 13.5-14.6 volts DC when charging a 12V battery

Jan 07, 2009 | 1989 Honda Accord 4 Door

2 Answers

1989 Honda Accord bad alternator


pull off all your air filter stuff,remove any hose that seems to be in your way thats pretty much it..you just have to play it by ear once it all clear how ever you can het your hand in there..

Dec 03, 2008 | 1989 Honda Accord 4 Door

1 Answer

1989 honda prelude


if you are somewhat mechanically inclined you should be able to follow these steps in order I put them. #1 Disconnect the negative battery terminal.#2 Disconnect the electrical terminals from the alternator.#3 Loosen the alternator adjustment and pivot bolts and remove the belt.#4 Remove the bolts and separate the alternator from the engine.#5 Remove the alternator bracket from engine.#6 Remove the fuel filter and any of the vacuum lines in the way.#7 Remove alternator from top of the car.#8 Installation is reverse of removal.

Jul 30, 2008 | 1989 Honda Prelude

Not finding what you are looking for?
1989 Honda Prelude Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...