Question about 1999 Ford Expedition

1 Answer

Problem getting the heat in my Ford Expedition to get hot

I am having a problem getting the heat in my 2001 Ford Expedition to get hot

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,615 Answers

First where is the coolant temp at on the gauge, If the water isnt getting to 180 to 210 then you may have a stuck open thermostat.. Its also possible your water pump impellers are deteriorated to the point they dont push enough water. This is all based on knowing that noone put stop leak in the system. Stop leak could clog the heater core but not effect the engine and it could of caused the themostat to stick open. Also its possible your climate control knob is bad. I've seen then crack. Pull it off and look. Also listen with the fan on. Listen for the doors changing. Also do you have duel climate control. If you have heat in the back but not in the front then i'd suspect a control issue. If you have the same front anfd back I would suspect a coolant issue.

Posted on Jul 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our 2000 Ford Expedition only puts out heat after being driven a mile or two even if it has been idling for a long period


when idiling in the winter it doesnt get hot enough until you raise rpms, that gets the motor hot enough to open thermostat so water starts circulating throughout the whole system.

Aug 24, 2012 | 2000 Ford Expedition

1 Answer

In a 2001 ford expedition when i connect the heater core hoses will my heater work better or will i get heat at all


if you have a good heater core and your hose are connected you should have heat if you just bought this and they were not connected your heater core may not be any good

Feb 03, 2011 | 2000 Ford Expedition

1 Answer

Driver power saet in a 2001 ford expedition dont


Either the switch is bad, or the motor athat goes forward and back is bad. A mechanic will need to check it with a diagram to determine which.

Apr 29, 2010 | 2001 Ford Expedition

1 Answer

No heat in a 2001 ford expedtion system blows but its all cold, heater core lines r hot into core and return


their is a blend door inside your air box were the heater core and the evaporator is for your heat and your ac the blend door is not moving either your vacuum control for the blend door is not opening or it could be the type with a electric motor and it is not working

Feb 17, 2010 | 2001 Ford Expedition

2 Answers

2001 ford expedition only blows hot air and when fan is off it keeps drivers feet hot


Hi under the hood the hoses going into the fire wall from the engine on one of the hose you have a valve which is open and close by a solenoid when it's defective it stays open check and close the valve

Sep 09, 2009 | 2000 Ford Expedition

1 Answer

Heater Coil


what do u mean by heat coil? heater core? if yes the the dash must come out, see link for step by step instructions
http://my.voyager.net/~sscully/F-15097HtrCoreRepairF150_Exp_002.doc

May 14, 2009 | 2001 Ford Expedition

1 Answer

2001 expedition heater does not heat well


I would flush the whole system with radiater flush then replace with new coolant. But make sure the heater is set to full heat when you flush it ( while driving around the block with flush in it) so the small radiater that has the hot water flowing through it gets flushed too. It may have some build up in it stopping the full flow of heated water/coolant through. If it is bad enough may need to remove and spray out the rubber hoses from the motor to the heater core, and possibly remove the heater core and hose it out to make it flow better and therefore increase the heating ability. Hope this helps.

Dec 31, 2008 | 2001 Ford Expedition

3 Answers

My heat in my truck doesnt work


the blendoor on the heater box maybe broken ck lines going to heater core and make sure they are hot. does the heat temp change at all from cold to hot?

Dec 05, 2008 | 2001 Ford Expedition

1 Answer

2001 FORD EXPEDITION


your controls have problems. the heat is there it is just not getting out because your control lines are not setting the vent controls into the proper positions. i had a chev van that lost some of the foam in side there and it blocked the whole front off. i had to rip it all apart to get at it

Oct 23, 2008 | 2001 Ford Expedition

Not finding what you are looking for?
1999 Ford Expedition Logo

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5572 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...