When i crank my 2007 toyota camry the abs and bake lights is not on, once i start driving my car and the motor gets warm, my abs and brake light comes on causing my speedometer to stop working
Check the level of brake fluid in the reservoir of the master cylinder
run the fault codes to determine the problem sensor
Whenever
this warning light or any other stays on in the dash it is indicating
that the systems control module (or the system sensor in the case of
lights like low oil pressure, door open indicators etc.) has detected
a fault, it then disables the system (this applies to ABS,TCS, TCM,
SRS and BCM faults and others) as long as the light is on. You must
now have the dealer hook up a special electronic diagnostic tool and
"scan" the system for the fault code that is stored for the
problem(s)
Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module
438 views
Usually answered in minutes!
×