Question about 1992 Ford Explorer

1 Answer

I need a place to show how to replace the tranny.

I need a good place to look on how to replace the transmission on a ford explorer.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,124 Answers

Auto or manuel ?
I will assume auto - by majority..
You mean doing it yourself ??
Just a few tings to consider..
If you have experience - thats cool..
However - replacing a auto trans is a pretty involved job..
When the new trani goes in - the tourque converter has to be turned just right..
It can be a very tricky job..
You may want to consider doing it with someone that knows how with experience..

Hope this helps !!

Posted on Jul 13, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I remove a transmission from a ford

You can got to autozone dot com and register for free for a free online repair manual.

You will need to disconnect the negative battery cable, then disconnect solenoid by unclipping it, then remove any vacuum hoses and the linkage rod. Remove bottom support bar, place a tranny jack underneath the vehicle, have a helper loosen the bolts and set it down.

Mar 19, 2010 | 1996 Ford Explorer

1 Answer

1999 ford explorer no reverse tries to engage but kicks out

The first thing to go in a transmission is usually reverse. Find the cheapest place to have it rebuilt before the rest goes. Alternatly you can try to replace the transmission filter. Fords usually have a 12 bolt tranny pan and the kit comes with filter and new gasket. Also, u may lose a few quarts of fliud after you remove the pan.

Jan 09, 2010 | 1999 Ford Explorer

1 Answer

I have a 91 ford explorer 4.0 4x4 automatic transmission and when o put it in park it does not work, i have to use the e-brake to park the explorer...what part do i need to fix in the transmission that...

down at the transmission is an adjustment you can make to hopefully get it bak to park on the left side of the transmission you will find a cable with a nut at the end loosen the nut and move the lever on tranny until it locks into park. if it doesn't work get help from a tranny shop too complicated. and a major job to replace park pin

Jan 05, 2010 | 1991 Ford Explorer

1 Answer

Can a person put a external transmission oil filter on a 1993 ford explorer, 4 litre model.

A filter can be place anywhere along the lines between the transmission and the tranny cooler. Ideally it should be placed before the cooler. This way any debris will be prevented from clogging up the cooler.

Take a look a the pic I included. This is a good place for an external filter. It keeps it up away from debris thrown up from the road. It also allows for easy changing. Although the pic isn't a 93 explorer this is the preferred place for this type of addition to the transmission.
I hope this helps.


Nov 23, 2009 | 1994 Ford Explorer Limited

1 Answer

My 1997 ford explorer overheated and the transmission slipped

Tranny fluid may have been contaminated with coolant since tranny cooler lines go to radiator or condensor.
I would fix your leak on radiator, then completely drain tranny fluid and filter and replace.

Aug 06, 2009 | 1997 Ford Explorer AWD

3 Answers

I need change the automatic transmission fluid Explorer 2002 E.B.

There IS a transmission drain plug on the 2002 Ford Explorer! It is, however, difficult to get the fluid back in as there IS NO dipstick (tube) to refill it. I installed the pan bolts far enough to hold the pan up (level) and then stuck a hose (attached to a funnel at top of engine compartment) through the opening between the pan and the bottom of the transmission. I was able to put five quarts in that way - no more as it will overflow (trust me). You can check other sites on how to check to see if that's enough and how to add more as needed. That's not simple either. Great idea Ford Motor Company (sarcasm) !!!!!!

Jun 12, 2009 | 2002 Ford Explorer

1 Answer

1996 ford explorer transmission slipping?

it could be the sensors on the transmission itself or the torque converter I would take it to a place that is highly recommended and see what they have to say

Mar 20, 2009 | 1996 Ford Explorer

1 Answer

Transmission is leaking alot of oil.

it is prob leaking out of front seal. remove tranny and replace front seal behind torque converter the replace tranny back up into place.

Feb 15, 2009 | 1999 Ford Explorer

1 Answer

Linkage for transmission

Why don't you start by getting the correct linkage. Maybe the tranny you replace is not exactly the same one. No difficult to replace, some of them have adjustments so maybe you might be able to get away with it, by adjusting it properly. Ensure the tranny is in the park position when adjusting, if properly adjusted, all the other gear shift should fall in place.

Oct 11, 2008 | 1994 Ford Explorer Limited

Not finding what you are looking for?
1992 Ford Explorer Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers


Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides