SOURCE: water pump replacement procedure 2005 2500 dodge with cummins diesel
take off old water pump. clean up area on the motor real good.do this by using a scrapper and cleaning slolvent. when thats all done put hi temp silicon on the block water pump and the put gasket on silicon. let dry for like five minutes. put in on torque bolts to specs.
SOURCE: 2006 Dodge Ram 2500 diesel truck----need inside fuse box diagram
If you are looking for the fuse box diagrams or any other diagrams for your Ram, check promanuals.net for a factory service manual for around 20 bucks or so. It's an invaluable tool for my Ram 2500.
SOURCE: problem with hid on 2008 dodge ram 2500
Not too much amperage. HID lights use less amps. Duh. The circuit is showing a failure in the HID kit from not enough amps so it turns off. You need to add a resistor.
SOURCE: 2006 dodge ram 2500 a/c fuse rely
The AC relay is located in the under hood fuse box. The cover should have a legend for location. Its one of the bigger black ones. You can rotate it with the horn or ABS one to see if its the problem. You may have a small fuse also in that box for it. If this doesn't solve the problem then you either have a leak or a computer problem. What a shop will do is try with a bidirectional data scanner turn the AC on. If they can't get it to turn on with a scanner then you most likely have a failed PCM if they verified you do not have low pressure or a relay or wiring or switch issue.
SOURCE: 2001 dodge ram 2500 v10 oil pressure drops to 0 then back up
you need to put an oil pressure gauge on it and see what happens.what you will find is that the sender unit is no good.
154 views
Usually answered in minutes!
×