1995 Cadillac STS only drivers window is working others not

replace the master switch on the drivers side door most are computer controlled

Adjust seat and steering to comfortable position press set and 1 on drivers door,position will be put into memory. put seat and steering into position that it is easy to get out of car, press exit 1 and the exit position will be in memory. do same procedure for driver 2.

how do I get the caliper bolts off

The windows are controlled through a computer module referred to as the BCM, it must be scanned to determine why it is not letting the windows operate.

You might want to check your master window lock which should be on the driver side door with the lock and window controls.

it's either cloged on driver side or the little vaccum hose that controls it has a crac in it or has fallen off

check flasher unit, check bulbs, check fuses

No it wouldn't be a fuse because it's partially still working,LEDs are wired in series so it could be one LED is burnt out or the current limiting resistor has opened for that section.Repairing it would be fairly simple but will require a multimeter preferably with a diode tester and a soldering iron.If you're not familiar with using a multimeter and testing electronic circuits I would say let a professional repair it or replace the whole unit.Comment back and I will give you the test procedures if you fell confident in making the repair.

My car (Acura 3.5RL) has memory seats. What I do is set the seats and side view mirrors up the way I like, then press the driver #1 button and hold it until I hear a beep.

There is a little piece of metal to the left of the parking brake. Pull this down with one hand and then you will be able to pull thee parking brake up with the other hand.