Question about 1995 Nissan Pickup

1 Answer

I have a 1995 nissan pick-up i need to change out my water pump how do i get the pulleys off the water pump housing and alt?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

When you take the fan clutch off the pulley comes off with it.

Posted on Jul 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the book say in hours to replace the timing / water pump on a 1997 chysler cirrus 2.5 v6 ? Or in your opinion what's a fair price to have this done by private person coming to the house .


Replacing Chrysler 2.2 and 2.5 liter engine timing belts

www.allpar.com/fix/timing-belt-22.html
Replacing the timing belts on Chrysler and Dodge 2.2 and 2.5 liter ... Then loosen the bolts on the crankshaft pulley and the water pump pulley so they will be ...

HOW TO PUT WATER PUMP ON - 1997 Chrysler Cirrus

repairpal.com > Questions > Chrysler > Cirrus > 1997 Chrysler Cirrus
Jul 4, 2010 - WATER PUMP WANT HOLD WATER LONG AND NOW IS MAKING A ...If you change the water pump,you need to also change the timing belt ...

Timing belt - 1995 Chrysler Cirrus - RepairPal


Nov 24, 2015 | Cars & Trucks

2 Answers

Can i replace the water pump in a 1997 Nissan pickup without messing with (replacing) the timing chain?


D21 Pick up? The water pump is not timing belt driven. It is drive belt drive with a pulley held on with 4 bolts.

So, yes, the water pump can be replaced without touching the timing components. :-)

Nov 22, 2011 | 1997 Nissan Pickup

2 Answers

Replace water pump 1995 aurora


Water Pump REMOVAL & INSTALLATION 3.5L Engine
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Partially drain the cooling system.
  3. Remove or disconnect the following:
    • Water pump pulley bolts, loosen but do not remove at this time
    • Drive belt
    • Idler pulley
    • Water pump pulley
    NOTE: The water pump is attached to the engine with both long and short bolts, be sure to note their locations.
    • Water pump and discard the gasket
    NOTE: Note the locations of the 5 long bolts.
  4. Clean the water pump mounting surface. Fig. 1: Be sure to install the 5 long water pump bolts in the correct locations - 3.5L engine 9300z502.gif
    Fig. 2: Water pump mounting - 3.5L engine 9300z503.gif
    To install: NOTE: Be sure to install the 5 long bolts in the proper locations.
  5. Install or connect the following:
    • Water pump using a new gasket. Torque the bolts to 124 inch lbs. (14 Nm).
    • Water pump pulley
    • Idler pulley. Torque the bolt to 37 ft. lbs. (50 Nm).
    • Drive belt
  6. Refill the cooling system.
  7. Start the engine and check for leaks.
3.8L Engines
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Drain the cooling system.
  4. Remove or disconnect the following:
    • Serpentine belt
    • Heater and bypass hoses from the water pump
    • Water pump pulley
    NOTE: The long bolt can be removed by aligning the bolt head with the frame rail hole.
  5. Install an engine support fixture.
  6. Remove or disconnect the following:
    • Torque axis mount
    • Water pump and discard the gasket
    To install: Fig. 3: Exploded view of the water pump and mounting bolt locations - 3.8L engines 7922xg01.gif

  7. Thoroughly clean all the sealing surfaces.
  8. Apply a thin bead of sealer around the outside edge of the water pump
  9. Install or connect the following:
    • New gasket
    • Water pump. Torque the inlet and outlet side bolts to 29 ft. lbs. (39 Nm) and the remaining bolts to 97 inch lbs. (11 Nm).
    • Torque axis mount
  10. Remove the support fixture.
  11. Install or connect the following:
    • Water pump pulley
    • Water pump hoses
    • Serpentine belt
    • Water pump pulley bolts. Torque the bolts to 115 inch lbs. (13 Nm).
    • Negative battery cable
  12. Refill the cooling system.
  13. Start the vehicle and check for proper operation.
4.0L Engine
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Drain the cooling system.
  4. Remove or disconnect the following:
    • Air inlet duct
    • Water pump drive belt cover
    • Water pump drive belt
    • Lower radiator hose and bypass hose
    • Thermostat housing from the water pump housing
    • Water pump from the water pump housing, by turning the locking ring with a Water Pump Remover/Installer tool J-38816
    To install: Fig. 4: Exploded view of the water pump housing and water pump - 4.0L engine 7922xg02.gif

  5. Install or connect the following:
    • Water pump, seat the locking ring
    • Thermostat housing to the water pump housing
    • Lower radiator hose and coolant bypass hose
    • Drive belt and drive belt cover
    • Air inlet duct
    • Negative battery cable
  6. Refill and bleed the cooling system.
prev.gif next.gif

Jan 24, 2011 | 1995 Oldsmobile Aurora

1 Answer

What should the correction tension be for a 1995 Nissan pickup & how do you check it?


as a rule of thumb, you should have no more then 10mm of up/down movement of the belt in the longest belt run ( the longest distance between any of the pulleys the belt runs in).
Simply grip the belt bewteen a figner and thumb and push and pull the belt in line with itself and the pulleys.
Too little tension will cause charging and water pump issues.
Too much tension will cause early failure of the alternator or water pump bearings..

Dec 19, 2010 | 1995 Nissan Pickup

1 Answer

How do you remove and install a water pump on a 1995 Nissan pathfinder?


big job you will have to remove the timing belt to do it so you might as well change it since you will have it off,but i don' t recommend just any body do it as you will need metric bolt puller set to remove the crank pulley,but mostly you remove the radiator shroud and everything in the way of the plastic belt covers as they have to come off to access belt and water pump.its about four hour job with professional tools.

Feb 06, 2010 | 1995 Nissan Pathfinder

1 Answer

How do i change a water pump in a 1995 Pontiac Grand Prix


Hope the following will help.
1) Drain the radiator.
2) Loosen the 4 bolts on the water pump pulley. You will remove the pulley and install it on the new pump. Just loosen the bolts 1/4" turn with the belt still on, this will prevent the pulley from turning.
3) Remove serpentine belt.
4) Remove 4 bolts and the pulley and set aside.
5) Remove two power steering pump bolts (15mm). You must do this because one of the bolts for the water pump is behind the PS pulley, and you can�t remove it without moving the PS pump out of the way. The bolts on the PS pump are in the 12 o�clock and 6 o�clock position. There is a large access hole in the PS pump pulley. Just line it up, slip in a long socket and remove them. Let the PS pump rest on the oil filter housing.
6) Remove water pump. There are 4 large bolts (15mm) and 4 small bolts (3/8") on the water pump. After the bolts are all out, I placed a length of pipe on the water pump and gave it a couple taps with a hammer and it popped right off.
7) Remove old gasket. The tool of choice IMO is a razor blade like you�d use to remove a winshield inspection sticker. Be careful not to score the mating surface. Remove old gasket and dry off surface.
8) Seat the new gasket and water pump in place, install all the bolts.
9) Reinstall the PS pump and torque bolts.
10) Install pulley on water pump and torque.
11) Install serpentine belt.
12) Re-torque bolts on water pump pulley if needed.



Sep 29, 2009 | 1995 Pontiac Grand Prix

1 Answer

Leaking coolant from crank seal on 1991 toyota sr5 4x4 pick up. i figure the water pump has a seal gone behind timing cover and no other leaks it over heated today at highway speed .


THE WATER PUMP HAS A WEAP HOLE ON THE BOTTOM OF THE HOUSING THAT INDICATES PUMP FAILURE BY LEAKING WHEN THE PUMP NEEDS REPLACING. IT IS TIME TO REPLACE THE WATER PUMP. IN ADDITION YOU MAY WANT TO REPLACE THE TIMING BELT AS WELL WHEN YOU REMOVE THE TIMING COVER AND CRANKSHAFT PULLEY. I HOPE THIS CLARIFIES ANY QUESTIONS YOU MAY HAVE. THANKS FOR USING FIX-YA AND FOR ANY COMMENTS YOU WISH TO SHARE. PLEASE KEEP ME POSTED. GOOD LUCK

Sep 21, 2009 | 1995 Toyota Camry

2 Answers

Do I need any special tools? How Hard is it?water pump 2002 aztek


take everything around your water pump of and use a metric 10 box end wrench

Apr 30, 2009 | 2002 Pontiac Aztek

1 Answer

Water pump


These numbers are in foot pounds water pump attaching bolts=30  water pump pulley attaching bolts=20 fan clutch to fan blade bolts=17 fan assembly to drive hub nut=42 thermostat housing bolts=17

Jul 18, 2008 | 1995 Dodge Ram

Not finding what you are looking for?
1995 Nissan Pickup Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...