Question about 1994 Isuzu Pickup

2 Answers

How do you change the fuell pump on a 1994 Isuzu Pickup truck?

Posted by on

  • bullocksusan May 11, 2010

    Most carbuerated models have fuel pumps directly attached to the underside of the intake manifold. Since this was a transition year for fuel injection, some 2.3 engines have the fuel pump inside the fuel tank. Assuming that yours is attached under the intake manifold, you will propably need to remove the intake manifold to gain needed repair access. Tag each vacuum line and connector before attempting removal.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 136 Answers

The fuel pump is mounted to the underside of the intake manifold where it bolts onto the cylinder head (real pain to get to). If you remove the fuel pump there is a plastic spacer between the pump and the manifold (DO NOT LOOSE IT).
Good luck
MIKESTA

Posted on Jul 13, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How I get fuel to carb from fuel pump on a 1994 Isuzu pickup 2.3 liters 4 cylinders

Posted on Apr 26, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I change my fuel pump , filter on my 1994 Isuzu pickup truck ,4cylinder 2.3 liters and I have no gas a carburetor. I try using starting fuel to start it and its starts and dies . How can I fix it?


Take the gas line off at carb, and crank the engine over. If gas does not start spurting out from the gas line, then the new pump is not working right. Maybe the pump arm is not situated right against the eccentric gear that makes the pump work. You would need to re-situate the fuel pump.

May 10, 2016 | Isuzu Cars & Trucks

1 Answer

Why does my 1994 Isuzu pickup truck 2.3 liters 4 cylinder is not receiving fuel to carb after installing a new fuel pump??


Can you hear the pump run? Is there any chance that it wasn't plugged back, properly? Also if the filter and I was removed. Could it be backwards?

May 10, 2016 | Isuzu Cars & Trucks

1 Answer

How do I get fuel from fuel pump to carb on a 1994 Isuzu pickup truck after I install a new few pump?


The fuel pump is electric? It should feed the carb with a few pushes on the accelerator peddle with the key on. If not, try "starting fluid" available at local auto parts store. Comes in a spray can and you spray it into the top of the carb while someone else turns the key and pumps the gas peddle.

Apr 26, 2016 | Isuzu Cars & Trucks

1 Answer

1994 Isuzu Pickup 2.3L carbureted motor with mechanical fuel pump lost prime


If it were just that you would be ok once the engine started.
You might have a float problem with the carb. or something in the tank.
Are you sure the pump is not pumping ?

Jun 28, 2012 | Isuzu Pickup Cars & Trucks

1 Answer

What is the timing setting the truck pops when you excelorate,do you use a timing gun or line up the gears


Line Up the Gears.

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1994 Isuzu Pickup. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/isuzu/model/pickup/1994_isuzu_pickup_timing_belt_diagram_marks.htm

Nov 10, 2009 | 1994 Isuzu Pickup

1 Answer

92 Isuzu changed water pump 2 times and still won't pump water?


take the themostate out and run the car. if there are water curculating, the you have a ba themostate.

Apr 17, 2009 | 1994 Isuzu Pickup

1 Answer

Chainging water pump on 1994 Isuzu Pick-up


remove number 10 bolt from oil pan

Jan 20, 2009 | 1994 Isuzu Pickup

2 Answers

Replace water pump 1994 isuzu rodeo 3.2


How do I change water pump on 1994 Rodeo 3.2 .

Jul 15, 2008 | 1997 Isuzu Rodeo

Not finding what you are looking for?
1994 Isuzu Pickup Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14381 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...