Question about Plymouth Acclaim

1 Answer

1990 acclaim 2.5 no power to fuel pump, no fuse, wiring looks great ???

Posted by on

  • balzac1 Jul 13, 2009

    I did check for spark and have a good one

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 2,200 Answers

Hi

The fuel pump is not on just on a fuse its also on a Relay.

The plymouth is often plagued with ASD relay issues. (Auto Shut Down) The relay controls a number of systems, mainly being spark and fuel. Bad grounds to it and corrosion are the main culprits.

The auto shutdown relay interupts power to the electric fuel pump,the fuel injectors,the ignition coil and heated oxygen sensor.

Undoubtedly this is the source of your problem. Be aware also the ASD may shut if there is a problem with the signal from the distributor which in turn shuts off fuel pump.

Hope this helps. Please remember to rate my answer. Many Thanks.

Posted on Jul 13, 2009

  • Radio Code Pro
    Radio Code Pro Jul 13, 2009

    Hi



    If you are absolutely sure you have no power to the fuel pump - it can only be caused by one of these things



    1) Blown fuse

    2) Broken wiring

    3) Loose/corroded/bad connections or bad earth

    4) Failed ASD

    5) ASD closed through problems further up the line e.g distributor



    If these all check out power must be reaching the pump and the diagnoses must be pump failure.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Put 3 fuel pumps in fuel pump and fuse keeps failing


I would disconnect the fuel pump harness at the pump and turn the key on. If the fuse blows, look for damage to the wiring harness and under the hood for any signs of heat to the power distribution box at the fuel pump fuse. Let me know what you find.

Oct 20, 2010 | 1990 Toyota Corolla

1 Answer

1990 3.3L plymouth voyager fuel problem, the van will turn over but isnt getting any fuel....need to either get a relay? or a fuel pump, it looks like there are 2 fuel pumps in the tank? eeeer!


one pump. Check for power to the pump there should be power anytime the engine is cranking or running. If there is no power than you can work your way back through the wiring, relays, fuses. If there is power and there is no fuel pressure than the pump has probably failed.

Sep 26, 2010 | 1990 Plymouth Voyager

1 Answer

I unhooked the radio to attach a Syrius radio antenna. The radio quit working along with all interior and exterior lights, air conditioner, airbag light on and fuel gauge giving false signal. Checked all...


sounds like you have a wire that is touching something not supposed to be or a blown fuse or a tripped relay have to take out radio see if power comes back if does look for wire causing messed up signal check your radio relays

Sep 24, 2010 | 1990 Plymouth Acclaim

1 Answer

I have a 1990 volvo 740 gl, the car will turn over but will not start. Checked the fuel line at the engine, no fuel. Replaced pump and fuel filter on frame. Still no fuel, checked wiring to the fuel pump,...


check the fuse on the left fender about mid fender up near top edge. its in a rubber holder and is a sigle fuse. pull it out and look for heat damage on the fuse and holder. if damaged replace fuse holder and fuse

May 29, 2010 | 1990 Volvo 740

1 Answer

Have 89 f-150 there is no fuel pressure. it has 2 tanks what is the chance both fuel pumps are bad. What else should i look at


Check the fuse box and make sure the power wire is has 12 volts of current, replace the fuel filter.

Feb 17, 2010 | 1990 Ford F150

2 Answers

IS THERE A FUSE THAT ALLOW GAS TO SPRAY THROUGH


Your vehicle doesn't have a carburetor. What you poured gas into was the throttle body. Does it stay running once it starts? You really should check the fuel pressure to be sure but not everyone has a gauge. Changing the fuel filter would definitely be a good start. If that doesn't do it, check the fuses for the fuel pump and check the fuel pump relay. If they check out make sure the power is actually getting to the fuel pump, check the ground wire of course also. If you have good power and ground at the pump and no fuel you will have to replace the pump most likely.

Nov 29, 2009 | 1995 Plymouth Acclaim

1 Answer

No power to the fuel pump on a 1990 K5 blazer need a wiring diagram for that model to trace the power wire back from the fuel pump


CHECK FUSE + RELAY TO FUEL PUMP.IF THEY CHECK OUT GOOD.YOU HAVE PCM PROBLEMS. MAKE SURE PCM FUSE IS GOOD.YOU CAN BUY A HAYNES REPAIR MANUAL.IT HAS ALL OF YOUR ELECTRICAL DIAGRAMS.

Nov 10, 2009 | 1990 Chevrolet K1500

1 Answer

No power to fuel pump or to pump fuse at fuse block


You can get wiring diagrams from autozone.com -- they have parts of repair manuals online. I have the smae problem but the person I got my 88 fox gl from wired up a switch going to the fuel pump that you have to leave on while driving. I"m probably giong to fix this soon. It looks like the wire powering the fuel pump relay comes from the ignition switch. So if the pump side of the relay is good, but aren't getting power, you may want to see if your ignition switch isn't providing power on one wire, going to the fuel pump relay.

Jun 24, 2008 | 1990 Volkswagen Fox

1 Answer

1990 Plymouth Acclaim won't start.


Check your battery terminal connections first. The starter draws much more current than your accessory panel and a loose connection at the battery is a good place to start. Corrosion at the terminals can be a problem also. Post your results from this test and we'l go from there.

Jun 10, 2008 | 1990 Plymouth Acclaim

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...