Question about 1998 Dodge Caravan

1 Answer

I can change the serptine belt but i wanna know how do i take out the small belt right next to it,because I dont see a tentioner for that small belt.1998 dodge caravan.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 120 Answers

Good day
it sounds like the power streeing pump belt, all you have to do is loose the pivot bolt and then loosen the adjustment bolt and you will be able to move the pump to remove the belt. If you don't know what the pivot or adjustment bolts are look at the pump and you will see bolts just loosen those until the pump moves

hope this helps

Cheers.

Posted on Jul 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Chevy Lumina 1994 3.1 V6


Take a ratchet u will see small square box that the rachet will fit.as u tight in it should move The tentioner should move one way or other u will see then slide off .make sure u remember the way belt is on if u don't have diagram

Jan 05, 2015 | Cars & Trucks

1 Answer

How do i remove the fan to replace the serpentine belt


do not remove the fan. you have a automatic belt tensioner. look for small pulley to passenger side of fan. pulley will be attached tp leaver which is the tentioner. on the leaver in a 3/8 dive hole in it so you can attach a ratchet or braker bar in . once you in mount ratchet push or pull on ratchet to release tention hold back on tentioner and take belt off pay close attention to how the belt is routed.

Jul 13, 2012 | Cars & Trucks

1 Answer

Where is belt tensioner and how do you turn it to loosen belt to change


The belt tentioner pully is the idler pully in the serpentine belt system...
You need a long wrnch (11/16??) to fit the pullys center bolt...
Turn the bolt to the right ( righty tighty) and the tentioner will losten its tention on the belt enough to remove the belt...
Imediately replace the belt ... so its routing is not forgotten by time or distraction...
If there is still a sticker on the upper radiator support reflecting the serpintine belt routing.. then you are in a better spot to be doing this ... with distractions...

Oct 06, 2010 | 1995 Chevrolet K2500

1 Answer

Did a timing belt and water pump and tentioner on 02 highlander. started right up runs great the next day the check engine light came on? any ideas


could be related, or could be totally seperate issue, my advice is to go to a dealership and just get them to DIAGNOSE before you go any further ahead, not knowing what state the car was in or why you changed the belt and pump....its hard to say now......diagnose the fault codes and then we will go from there

Jun 15, 2010 | 2002 Toyota Highlander

2 Answers

1993 NISSAN MAXIMA HOW CHANGE ALETERNATOR


Suggest replacing all the belts also. 1st belt, remove coolant reservoir. Loosen the pulley next to the res. then there is a tension bolt behind it. get under the car, the alternator is right there on the passenger side. possible under a small shield. Loosen all the bolts on the alternator, then there is a tentioner on the alternator. Loosen that, remove belt, then take out the rest of the bolts, along with the plug and the ground wire to the alternator. for the P/S belt, loosen the other pulley 14mm, and then the tention bolt is another 12mm.

Nov 05, 2009 | 1993 Nissan Maxima

1 Answer

Timing belt installation alfa 156


remove the fan belt first them start removing the bolts holding on the timing belt cover. once its off you have remove the large pully at the bottom of the engine. Mark up the small pully on the bottom and the two at the top to get your timing, make sure they dont move. release the timing belt tentioner and remove the old belt. you kit should have a new tentioner, idle pully and belt. above all mark sure your timing marks dont move, or your in trouble when you start the car.

Aug 30, 2009 | 2000 Alfa Romeo 156

1 Answer

How to change timing belt


This is how 2.8TD.Remove the belts (fan and power steering)with a 10mm socket un-screw the plastic cover. To remove the bottom pully their is 3 small screws inside the pully (10mm or 12mm) unscrew them and take off the pully. Do not try to remove the big nut. Remove the plastic cover. Their is a small hole in all the drive wheel's their is a treaded hole in the engine block behind each one and a mark on the crank shaft. Turn the engine until the mark on the crankshaft is at the top then push the bolts ( metric course tread 12 or 13 mm head 4 to 5 ins long) through the holes in the drive wheel's and try to screw them in if they dont line up first time turn the crankshaft 1 turn and try again. When they all line up screw in the bolds this keeps the timing in place. Release the tention pully (the one with no tracks on and pushing against the back of the belt) remove the old belt replace. To tighten the tention pully put a small socket bar in the square hole turn until the belt is tight hold the preasure on the socket bar ant tighten the locking screw. Remove the screws job done.

Jun 11, 2009 | 1995 Isuzu Rodeo

1 Answer

1995 Jeep Grand Cherokee - Removing serpentine belt


Faceing the Engine The Tentioner is on the LEFT side next Pulley Down from the Alternator , Use A Box end 6 point Wrench to Turn Tentioner To the Right (CLOCKWISE) to Loosen the Belt, Take A Good Look at it If there is No Belt Diagram to Remember the Way It is Routed if thats all you need then you R on your way. Good luck !

Feb 05, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Suzuki baleno 2001 serpertine belt


The easiest way to change a serpentine belt is to first draw yourself a pic as to where it goes so you know how to put it back on. Then you can either undo the altinator tension bolt until you can get the belt loose enough to get it off or you can use a big spanner or a spanner with a long pipe and a mate to pull the self tentioner wheel back and replace the belt. The self tensioner should be ontop of the motor next to the power steering resovior ( small wheel about 3 inches round will be smooth on the belt surface and the top side of the belt rolls on it put spanner on the centre of the wheel and pull up) not all have this depends on the local you bought car in I'm in australia and they have self tensioning belt here)

Jul 25, 2008 | 2001 Suzuki Esteem

Not finding what you are looking for?
1998 Dodge Caravan Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...