Question about 2007 Toyota Camry

1 Answer



Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Make sure you have holes in bumper you can run wires through firewall and tie into fuse block+pos wire goes to at least a 20amp fuse and other side toswitch +pos wire from lights goes to other side of switch -neg wire goes to suitible body ground in engine compartment fender bolts use eyelet conector or you can attach to neg term of battery.royedwardtat

Posted on Sep 13, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi, I just purchased fog lights for my 2007 Mitsubishi Endeavor and I installed them already but I don't know the necessary steps to get the fog lights turned on. Can you help?

fog lights have to be wire in correctly to be compliant with the high way code of regulations for lights

they should be wired through an independent switch, through a relay connected to the high beams relay so that when high beam is selected they are turned off

The law prohibits the use of fog lights in any condition except fog so to use them as extra lights is illegal and costs a big fine

Dec 20, 2015 | Mitsubishi Cars & Trucks

1 Answer

How do I replace a fog light bulb on a 2007 Toyota Camry SE

Should b able to unbolt/unscrew skid plate if it has it and go in behind the light..may b tabs or little bolt/screws holding it on...some fog lights come w interchangeable bulbs that u twist out from the housing...some u have to replace whole housing..not sure of the exact setup but that's where I'd start

Sep 06, 2014 | Cars & Trucks

1 Answer

Why fog lights wont turn on 2012 toyota highlander

On some of the newer vehicles, after the install you may need to get the dealer to do a software update so the vehicle knows that there is now fog lights. it may not know they are there yet.

Apr 26, 2014 | 2012 Toyota Highlander Base 4dr SUV 2.7L...

1 Answer


New car day running light is achive only by ecm programming

Ask the dealer

Apr 12, 2014 | Ford Cars & Trucks

1 Answer

High beam indicator comes on with fog lights

Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

1 Answer

I have a eclipse 2004 4 cycl. I gonna install OEM fog ligths, on the passenger side there is a electrical cable and connector for the fog light, but on the drivers side there is not one, can use the same...

Hi, if you're sure the cable is intended for the OEM fog lights, there should be no problem. All that is required is that the cable and fuse is large enough for the 2 lights. Make sure there is a fuse and that it doesn't burn when the lights are turned on. Please let me know if you have more questions, and thanks for using FixYa.

Mar 13, 2011 | 2004 Mitsubishi Eclipse

1 Answer

How to install OEM 2007 camry fog light? The wirings I know how to do it, but I need help how to install/mount the fog light Thanks!

Follow the link below to find with picture and step by step instruction to mount the foglights. It's lot easy than connecting the wires.

For me I managed to install the foglights but not sure how to connect to the power and bring the wire to the dashboard. My car didn't come with wiring connections for foglights. Would appreciate if someone can help me with that ( possibly instructions with pictures), Thanks.

Jun 24, 2009 | 2007 Toyota Camry

1 Answer

I dont know the wiring prossing

I would splice this in to an open fused area on your fuse block since all factory fog lights are on a separate circuit. The kit you bought should have a foglight relay with it also with instructions. If not buy the correct kit for your car instead of butchering up with cheap lamps on it

May 25, 2009 | 2009 Toyota Camry

1 Answer

Wiring of fog lights on 95 Mustang

If you bought the fog lights from Ford and they plugged into factory plugs at the front bumper, then I suspect you need the headlight switch that came optional for your car. You will need to install a relay into the fuse box. Check for any fuses for that circuit. I did one on a Ford f-150 and the switch came with the lights from Ford.Usually the fog lights are not on until you push a button or turn the switch.

Mar 15, 2009 | 1995 Ford Mustang

Not finding what you are looking for?
2007 Toyota Camry Logo

2,194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides