SOURCE: clicking noise from clutch when I push down to shift gears
there is a switch on the clutch linkage. you can see it if you look under the pedol it looks like a black cylinder that slides along the clutch shaft. when this breaks you can't start you Jeep.
Mine broke I had to wait 2 weeks for a replacement part.
oh yeah( it clicks when you press the clutch) so you know it is broken.
SOURCE: when you push the 4
a lot of 4wd you have to back up for a few feet to disengage the hubs after you tourn them back to 2wd
SOURCE: when clutch pushed in it makes high pitched squeel
Im a mechanic, i think you will find it will be the clutch release bearing on the clutch fork, when you push the clutch in it will push the fork which will push the clutch release bearing onto the clutch plate which rotating with the engine revs
SOURCE: 98 subaru impreza 5spd transmission bearing noise
Sure sounds like a throw out bearing having too much room. Might need adjustment.
SOURCE: 2003 chrysler sebring is hesitating whn at higher
(Fuel filter will not effect anything, it only prevents build up in engine)
Could be one of these-
Oxygen sensor
fuel sensor
Dirty injectors
Bad injector/injectors
~~~~Go to car zone/ or a frendly auto part store, and ask them for a FREE electronic computer check ( where they check the computer, and the computer tell them whats wrong)
170 views
Usually answered in minutes!
×