Question about 1994 BMW 3 Series
Simple open the trunk look at where the back end of the light assembly will be there should be a twist handle on the plastic twist it and there you go switch out your bulbs... Same goes for the bulbs in order to replace them twist the plastic and you should be able to pull it out.. Nothin to it ...
Posted on Aug 24, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1. Open hood.
2. Use a small flat screwdriver to CAREFULLY pry open cap leading to the headlight. Start directly underneath the tab that says "V2." Be careful not to break the tabs! -- to do this simply push the small screwdriver under the tab, as you push it in, you will hear the clip release. The cap will pop and remove very easily after that.
3. Pull out wire harness connecting to the bulb, push the spring clip in and to the side to release the clip and then you can pull the bulb out. Put the new bulb in (do not touch the glass portion or the bulb can explode from the oil residue) and reverse to close everything back up
Posted on Nov 05, 2009
Tips for a great answer:
Sep 02, 2016 | BMW X3 Cars & Trucks
Nov 01, 2015 | BMW Cars & Trucks
Dec 16, 2013 | 2006 BMW - X3-Series
Apr 08, 2010 | 2007 BMW X3 3.0si SAV
Nov 05, 2009 | 2007 BMW X3 3.0si SAV
592 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: