Question about 2002 Audi A4

1 Answer

How do you remove the headlights on a 2001 A4 to change the main globe

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 114 Answers

There are torx screws holding it in, two at the front top on the radiator support, and two on each side down low inside, you need a LONG torx to reach them..DON'T remove the two lower screws, just loosen enought to pull the light assembly out.

Posted on Sep 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Holden jackaroo 2001 model headlights are not working, high beam is working fine. What could be the problem?


how are the headlight globes ?
there usually are two filaments in the globe if the low beam filament blows in both headlights high beam will work but low beam may not.

Sep 17, 2015 | Holden Cars & Trucks

4 Answers

Headlight changing


please use chelton manual for getting instructions with diagrams.

remove the side screws and then remove the rim of the light

now you can access the lights


Oct 17, 2008 | 1992 Toyota Celica

1 Answer

How do i replace headlight globes on mr2 sw20?


Turn headlights to on. Then 2 clicks back to turns lighs off but keep headlights up/open.

Remove headlight shrouds, (Black plastics.) Use phillips + head screw driver.

Remove chrome trim ring using phillips head screw driver.

Pull out headlight bulb. Disconnect from harness.

Reverse to install.

Sep 12, 2014 | 1991 Toyota MR2

1 Answer

How do you replace a headlight globe?


There is a large rubber boot that covers the headlight globe . Pull it back, pinch the retainer spring and lift out the H4 globe.

Aug 15, 2014 | Cars & Trucks

1 Answer

Head lights


Left the bonnet behind the headlight Remove the head light dust boot and the head light connector then there is a spring type clip holding headlight globe unclip it the fit new globe reclip the spring clip and fit the connector and dust boot

Jan 20, 2012 | 2001 Dodge Dakota

1 Answer

NEED TO REPLACE HEADLIGHT BULB ON 2000 HYUNDAI GLS V6


hi I have just repaired the front of a 2001 sonata classique to remove the headlight assembly remove two screws one one top on radiator bracket one on side towards grill gently wobble to remove from locating pin, to remove just globe unclipcover on back of assembly them unclip globe from inside simple task
cheer chris

Nov 29, 2010 | 2000 Hyundai Sonata

1 Answer

Changing the brake light bulbs


Have you had a look from inside your boot? I could imagine its covered over with carpet but if you take off the boot wall/carpet and feel around you should find the wires which come out of the rear of the Lens which house the globes. Then you usually twist anti clock slightly (not a screw) to remove globe holder which has globe in it. Or there can sometimes be a wire spring holding the globe holder into the back of the lens. Im pretty sure it takes a bayonetglobe 5W. 47207.

Feb 09, 2010 | 2002 Audi A4

2 Answers

How to change globe on headlight ford focus 2005


avatar3.jpg

brian_au no 1 solution is wrong.. globe is under a spring clip cover . remove cover, then unplug, then release retaining spring behind the globe. replacement is just process reversal

Sep 18, 2009 | 2005 Ford Focus

3 Answers

Change the Front indicator on an Audi A4 2001


Take out the two Torx bolts on top of the headlight assembly. Then there is a third hidden bolt. Look through the holes in the top front of the fender, above and behind the headlight's turn signal portion (you'll probably need to shine a light in there) and you'll see the third bolt. Remove that and the headlight pulls straight forward and out. Then you can change the bulb.

Dec 09, 2008 | 2001 Audi A4

2 Answers

89 Pulsar Headlight


you need to replace it from the back, if its not accessable try removing afew things if not remove the entire headlight as it must be fitted from the back.

May 23, 2008 | 1989 Nissan Pulsar

Not finding what you are looking for?
2002 Audi A4 Logo

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14363 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...