Question about 1996 Suzuki X-90

1 Answer

How to remove door panel on x90

How to remove door panel on suzuki x90

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is there mud runs in on my passenger side of the floorboard in my 1998 Suzuki X90?


possible heater core leak --windshield seal leak or clogged drain

Jul 27, 2017 | Suzuki Cars & Trucks

1 Answer

I have a 1997 Suzuki x90. The Right side passenger window will not go up. How do I bypass the control to put it up?


you off the door card on door
then hot wire the motor.
if the windows jammed, doing so will fail.
if jammed fix that next.

Oct 28, 2015 | Suzuki Cars & Trucks

1 Answer

How to remove instrument cluster suzuki x90 ?


short answer, alldata.com ,log in read. it.

long.
old x90 very very rare car... and the service book x10 harder.
on 98s, they are hardest years, 1996 Suzuki put in huge changes to the dash of all cars. (side impact protection etc)
making service tad harder.
did you first look at the cluster there for screws, bingo?
see those 4 screws? they are in plain site......!!!
IF car has air bags defeat them first or risk INJURY !!!!!

here is the fsm quote.
  1. Disconnect the negative battery cable.
  2. Loosen the four retaining screws, then remove the instrument cluster trim bezel.
  3. Loosen the four retaining screws, then pull the instrument cluster away from the instrument panel until the back face of the cluster can be accessed.
  4. Detach the cable from the back of the speedometer. The speedometer cable is secured to the speedometer by one of two methods: a knurled nut, which can be loosened in a conventional manner; or a retaining latch, which must be depressed to disengage the cable from the speedometer. Also, detach the wiring harness connectors (there are three) from the cluster.
  5. Remove the cluster from the vehicle.
for more G16 engine questions here.
http://www.fixkick.com/



Jul 15, 2014 | 1998 Suzuki X-90

1 Answer

Gas burning to fast on my 1997 Suzuki x90


a Suzuki Jeep, a Japanese jeep?

high mpg . x90

(CEL glowing all the time?) ever scan it for DTC errors. its not hard.

http://www.fixkick.com/MPG.html

Feb 05, 2014 | Jeep Cars & Trucks

1 Answer

X90 fuse box identification


which one there are 2. ?
lost the operators guide? and x90 is a very rare car.
very hard to get books on it after so long, too.
the engine is the same as the 96 sidekick.
Why not photo them, and post it. no one ever has, it seems.

look here , for x90
http://www.scantool.net/software/alldata-diy-1-month-subscription.html



Jan 17, 2014 | 1996 Suzuki X-90

1 Answer

1996 SUZUKI X90 WONT START AND THE SPARK IS LOW


can only be 3 things, bad motor, bad spark and bad fueling, in that order.
and 3 tools to check each, in that order.
ever do the 60k tuneup, (I have 4 of these cars restored and 3 sold)
http://www.fixkick.com/nostart.html

my guess is fuel pressure good means it passes the squirt test
right? this is no carb, EFI needs 30psi, and squirt tests tell you near nothing.
Ponder this. if the motor had 170psi compression
and the spark was good, (it will be tuned up)
and is timed, right. is it?
then it will run perfect on test fuel. does it.?
if yes , then you have fueling problem , once this is proven, we work fueling hard.

Feb 13, 2013 | 1996 Suzuki X-90

1 Answer

Cigar lighter, & radio not working on1997 Suzuki


15 amp fuse is blown under dash on right side, pull off the blue/purple cover and check the (tail/dome) fuse. radio is probably not wired correctly.

May 12, 2011 | 1996 Suzuki X-90

1 Answer

Crank shaft sensor on a suzuki x90


allmost thats the problem
sensor should be under the main pully (crank pully)
resistence between the probs are 360 - 460 ohms

May 07, 2010 | 1997 Suzuki X-90

1 Answer

Suzuki x90 year 1998 repair manual


sure buy on ebay
search
"geo tracker service manual 1998"
same drive train.

buy suzuki parts from suzuki.
see links on my page for top suppliers.

http://www.kick-fix.com/

May 12, 2009 | 1998 Suzuki X-90

Not finding what you are looking for?
1996 Suzuki X-90 Logo

577 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...