Question about 2004 Honda Accord

1 Answer

Remove and replace rear brake shoes on 2004 honda accord

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 2,984 Answers

Brake Shoes Removal & Installation To Remove:

  1. Raise and safely support rear of vehicle.
  2. Remove rear wheel assemblies.
  3. Release parking brake.
  4. Remove brake drum.
Rear brake shoe assembly


remove and replace rear brake shoes on 2004 honda - 6c57c70.gif
  1. Using an appropriate brake spring tool, unhook upper return spring from rearward brake shoe.
  2. Push retainer springs IN and turn to remove tension pins.
  3. Lower brake shoe assembly and remove lower return spring.
  4. Remove brake shoe assembly from back plate.
  5. Disconnect parking brake cable from lever and remove brake shoe.
  6. Remove parking brake lever from brake shoe.

To Install:

d36458c.gif
  1. Install parking brake lever to rearward brake shoe.
  2. Secure lever to brake show with a NEW U-clip.
  3. Pinch U-clip closed.
  4. Connect parking brake cable to rearward brake shoe.
  5. Install self-adjuster lever spring on front brake shoe.
  6. Assemble clevises, adjuster bolt and upper and lower return springs.
  7. Apply a light coat of grease (Molykote 44MA or equivalent) to sliding surfaces.
  8. Install brake shoe assembly onto back plate.
  9. Install tension springs.
  10. Using an appropriate brake spring tool, unhook upper return spring to rearward brake shoe.
  11. Install brake drum.
  12. Install rear wheel assembly.
  13. Lower vehicle.
  14. Adjust self-adjusting brakes by pressing brake pedal several times.

Posted on Jul 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I back off rear brake shoes to remove drum?


there should be a slot either on the drum or on back side. insert a brake spoon or screw driver and turn the star to let shoe come together.

Oct 27, 2010 | 1992 Honda Accord

1 Answer

Change the brakes and have abs


Make sure the rear brakes ,if they are brake SHOES,that they are adjusted up,to where the drum drags on the shoes as you turn the drum by hand,the rear brakes,are what gives you pedal height.If this is fine,replace the master cylinder.

Apr 28, 2010 | 1996 Honda Accord

1 Answer

Honda civic 84 my brakes in the back right side has seized in the


Its probaly the wheel bearing that seized up, and you have to get the car towed, and get the bearing knocked out and replaced...Um sure the rear brakes are fine, because rear shoes dont really lock up, unless someone overtighten them, after doing a rear brake job...Goodluck...

Dec 26, 2009 | 1984 Honda Accord

1 Answer

I got a 1994 Honda Accord, the brake light stay on when R,D4,D3,D2,D1 but when you put It on P or Neutral go off.I check brake fluid level and the float it's OK and the hand brake switch works fine. I...


In some cases the brake light will come on when the rear brake pads are getting worn down to low, check them if they appear to be lacking of enough brake material replace the rear shoes to make the light go out and restore adequate rear brake traction.

Sep 09, 2009 | 1992 Honda Accord

1 Answer

1994 Honda Accord- squeaky brakes


Could just be cheap brake pads. If you don't want to squeal, get a good quaility brake pad, and make sure the rotors are smooth.

Jun 06, 2009 | 1994 Honda Accord

1 Answer

Brake lock-up


I suspect that you have front disc and rear drum brakes.You did not say which of your brakes are locking up. I suggest that if your front brakes are locking {skid} that means your rear brakes are not engaging. If your rear brakes are locking {skid} then I suggest you have problems with park brake or brake fluid leaking onto the rear shoes.
More info would help me help you. I will check back soon.

May 21, 2009 | 1985 Honda Accord

2 Answers

2004 buick emergency brake


This car has regular shoes on the back not disc. Replace shoes and adjust cable. No parking brake is a sign of worn out shoes. Regals have rear disc on them for this year.

Feb 21, 2009 | 2004 Buick Century

1 Answer

How to change rear brake shoes on a 2004 chevy venture


The rear brake shoes use a U clip to hold the shoes together. A simple solution to this change job is to change one side at a time.
Slowly unclip the U clip from the top of the shoe and remove the left shoe and spring. Replace the left shoe and reconnect the U clip, then do the same for the other shoe. Clean, adjust,and grease the self adjuster and you're done. Do the same for the other side of the van. If you take both sides of the clip off you're in for some heavy duty stretching with pliers unless you have the right tool.

Dec 29, 2008 | 2004 Chevrolet Venture Passanger

1 Answer

Replace rear shoes


  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove the rear wheels.
  3. Remove the drums.
  4. Remove the automatic adjuster spring and lever.
  5. Remove the hold-down clips and pins.
  6. Rotate the automatic adjuster starwheel enough so both shoes move out far enough to be free of the wheel cylinder boots.
  7. Disconnect the parking brake cable from the actuating lever.
  8. Remove the lower shoe to shoe spring.
  9. With the shoes held together by the upper shoe to shoe spring, remove them from the backing plate. 0900c152800c4b3d.jpgKelsey Hayes rear brake assembly (left side shown) 0900c152800c4b3e.jpgExploded view of the drum brake assembly—2004 model shown
GOODLUCK, shoes for this car ~ 15 bucks at auto zone.

May 27, 2008 | 2000 Plymouth Neon

1 Answer

Rear brakes on my 2004 Honda Accord


there should be an adjustment underneath follow the handbrake cable to where it becomes 2 if that doesnt work there may be like small shoe pads behind the discs check them also.

May 25, 2008 | 2004 Honda Accord

Not finding what you are looking for?
2004 Honda Accord Logo

3,350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...