Question about 1989 Ford Mustang

2 Answers

Ac problem i have a 2000 gt mustang and my ac is stuck on low, it wont blow any harder

Posted by on

  • graphic565 Jul 13, 2009

    thanks for responding so quickly, my friend said the same thing about the resistor, where is the resistor located?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

It's either a faulty switch where you adjust the speed setting or a problem with the blower motor.

Posted on Jul 13, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 1,348 Answers

Do you mean the fan speed?there is a resistor block that needs replacing that controls the speed or the fan is no good. connect the blower fan to 12 volts after unplugging it,and see if it works properly

Posted on Jul 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ac not working


lots of possibilitys, 1. blown fuse
2. low on refrigerant, will not let the pully to engage
3 nothing bad about fords, but they use plastic for air dams, inside of the hot and cold deck
4. try to change from cold to hot if it does not change refer to 3.
hope this helps

Aug 13, 2013 | 2000 Ford Mustang

1 Answer

Problem with ac blowing hot air on a 2002 ford mustang gt


Low or no freon. Bad compressor. If its low, find the leak, repair, evacuate and recharge with oil and freon. CLEAN Freon. NOT a quick fill with sealant. That will do damage the system.

You can jump the compressor without having the key on. Run a jumper wire from the positive post of the battery to the single wire plug for the clutch. If it clicks, find an AC shop and have it checked for leaks and repair.

Aug 11, 2012 | Cars & Trucks

1 Answer

96 mustang gt ac blows fuse after 5 minutes. Replaced field coil. Jumped low pressure switch. Blows 10 amp fuse in 2 minutes, 15 amp fuse in 5 minutes


it sounds to me like a AC resistor issue i have a beemer that did that same thing to me and it turn out that it was my ac resistor it would burn out my 30 amp ac fuse in 2 to 3 minutes usually when the resistors in a circuit break they tend to burn out the fuses as a warning. easy way to find out is by putting in a new fuse and after a minute go touch the negative lead on you battery if the cable is really hot then there's a short in the circuit or in the case of your ac it would be a broken resistor.
http://www.oreillyauto.com/site/c/search/Blower+Motor+Resistor/02627/C0331.oap?make=Ford&model=Mustang&year=1995&vi=1134166
there simple to get and simple to replace.

Jul 09, 2011 | 1996 Ford Mustang

1 Answer

Car


Its normal if your ac is on, if its on off when your using the ac it could be that the refrigerant is low and will not be sufficient to keep it on.

Jul 17, 2010 | 1999 Ford Mustang Cobra

1 Answer

Ac blows inconsistant ford 3.8l mustang 1995


have you had the freon level checked? Sounds like it is low on freon. My lincoln did that and it was just low on freon.

Jun 24, 2009 | 1995 Ford Mustang

1 Answer

2003 ford explorer ac compresser wont come on


possibly low on freon thers a switch that will not let it engage if pressure is to low!!! hope this helps you!!!also check for 12v at compressor!!good luck!!!

Jun 22, 2009 | 2000 Ford Mustang

1 Answer

Ac just quit


how much pressure do you have? low freon will cause compressor to stop running. do you have gauges to check?

Jun 14, 2009 | 2000 Ford Mustang

1 Answer

1996 Ford Mustang AC


I don't know about the part #. But the low pressure switch is on top of the accumulator, maybe the compressor is not cycling due to low refrigerant.If you are low on refrigerant the low pressure sensor will shut off the compressor.

Jun 02, 2009 | 1996 Ford Mustang

2 Answers

96 MUSTANG GT AC DONT WORK


check freon in system if not enough freon compressor wont kick in

Aug 03, 2008 | 1998 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...