Hello! Disconnect the negative battery terminal...Drain the radiator and disconnect the heater inlet and outlet hoses at the dash...Remove the blower inlet to firewall screws...Remove the blower inlet, motor and wheel as an assembly...Disconnect the control wires from the defroster door...
Disconnect the vacuum hose diverter door actuator diaphragm...Disconnect the control cable from the temperature door lever...Remove the four nuts securing the heater assembly to the dash...Remove the screw securing the defroster outlet tab to the heater assembly...Remove the heater from the car...
To install...Make sure the heater assembly seal is in good condition...Position the assembly onto the dash and tighten the retaining screws...Reconnect the heater hoses, electrical connectors and negative battery cable; Refill the engine with coolant, start the vehicle and check for leaks...
Guru................saailer
I’m happy to help further over the phone at
https://www.6ya.com/expert/david_6df67de3b14de867
×