Question about 2003 Volvo S80

Open Question

Volvo S80 B5234T7 2003,DTC 261A.please your support.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

roy7777
  • 109 Answers

SOURCE: My 2003 Volvo S80 cruise control workds sporadically.

IT SOUNDS LIKE A PROBLEM IN THE ACCUATOR MIGHT NEED ADJUSTMENT OR PROBLEM IN THAT CIRCUT

Posted on Apr 14, 2009

  • 85 Answers

SOURCE: 99 Volvo S80 water pump replacement

if this helps.. I had the 1998 model S70. the water pump was driven by the timing belt. you had to take the timing belt off just to replace the water pump. it was just a simple bolt on replacement. the only difficult issue is resetting the hydraulic tensioner on the timing belt. the hydraulic tensioner has to be completely taken off and compressed VERY SLOWLY in a vise. then insert a very hard drill bit or (special volvo tool) into a keeper hole, reinstall hydraulic tensioner onto car and reinstall timing belt.very quickly remove drill bit from keeper hole in tensioner and the tensioner snaps back out to put tension on belt. and you are done.

Posted on Jun 24, 2009

  • 179 Answers

SOURCE: 2000 volvo s80

0237 is turbo/ super boost sensor a circuit malfunction
0236 is turbo/ super boost sensor a ckt range performance

Posted on Jul 07, 2009

  • 1986 Answers

SOURCE: Have new mirror, need to know how to replace the side mirror on a 2003 Volvo S80 TR6

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

  • 1 Answer

SOURCE: how to reset service message on volvo s80?

2002-2007 All Volvo Models

  • The service reminder indicator lamp illuminates for 120 seconds when the ignition is first switched on
  • Insert key and turn Ignition Switch to position I
  • Press and hold in the reset button for the trip odometer
  • Turn the Ignition switch to position II (within 2 seconds)
  • Hold the reset button for the trip meter pressed in until the original trip counter value blinks and is redisplayed
    (For all vehicles 2003- a general yellow lamp will light when the reset button must be released.)
  • Release the reset button for the trip odometer within 4 seconds. The instrument gives an audible signal when resetting has succeeded
  • If the trip meter is already reset the reset button should be held in for a minimum of 10 seconds and a maximum of 14 seconds.
  • If the reset button for the trip odometer is not released within 4 seconds, the service reminder indicator (SRI) is not reset.

Posted on Aug 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 volvo s80 it is turning over but does not start. It gives me a code of p0340. So i put a new one in but it still the same


P0340. Camshaft sensor. Make sure the one you put is good as well. Also rest the DTC and try again.

May 15, 2017 | Volvo Cars & Trucks

2 Answers

Why does my 2000 S80 T6 Volvo sputters?


sputtering - Volvo Forums - Volvo Enthusiasts Forum ...

volvoforums.com > Volvo Forums - Volvo Enthusiasts Forum > Tags
cluster, engine, instrument, intermittent, s80, sputtering, stalling, volvo, T6 instrument cluster dies, engine sputter/stalls intermittently · jeffs80s. 11-06-2013 10:26 ...

Re: S80 sputtering, won't accelerate - Matthews Volvo Site

www.matthewsvolvosite.com > ... > Volvo S80 Forum
Dec 15, 2010 - 2000 V70R Black, 129,000 miles (Wife's R, getting up there, she won't sell it)! ... The S80 T6 is "just because I could" and it's a fun drive! Top ... S80 T6 2000, codes
Jan 18, 2011
misfires and sputtering 1998 V70
Aug 21, 2009
More results from www.matthewsvolvosite.com

Sputtering And Dying, Please Help - Volvo Forum : Volvo Forums

www.volvo-forums.com > ... > 1G (1998-2006) S80 Forum

Jan 30, 2012 - 4 posts - ‎4 authors
i recently bought a 1999 volvo s80 t6 with 170,000 in august 2011, with "no ... itsputters and dies. i try to start again and it wont. so i disconnect the battery for ... I have a 2000 S80 2.9 and have replaced the TCM and the ABS ... Urgent Transmission Service S80 2000
2 posts
Jul 23, 2011
On My Second New Maf And Still Problems
4 posts
Apr 2, 2006
More results from www.volvo-forums.com

Dec 03, 2015 | 2000 Volvo S80

1 Answer

What does error code P0716 mean on a 2001 Volvo S80?


Trouble Code: P0716
Input Speed Sensor Performance
Possible Causes:


P0716 The TCM detects an unrealistic drop in input shaft speed. ISS DTC P0716 is not failed this ignition. Transmission input speed is 1,050 RPM or greater for 2 seconds. Transmission input speed drops 1,000 RPM for greater than 4 seconds and does not recover with in greater than 0.80 seconds.

Go to a Volvo mechanic for specific help, they will probably replace a faulty sensor.

Best of luck.

Jun 29, 2014 | 2001 Volvo S80

1 Answer

What is po234 dtc 2002 volvo s80 2.9 turbo?


Turbo overboost. Erase and go easier on gas pedal. It happens on my '02 t6 from time to time.

Jun 28, 2014 | 2002 Volvo S80

1 Answer

How do you hard reset dtc?


go to Auto Zone and have do it for free. Diagnostic trouble codes are easy to reset.

Jun 28, 2014 | 2002 Volvo S80

1 Answer

I Have a 1171 code on a 1999 xc70 volvo and the engine runs real bad no power thanks


The control module receives information from the heated oxygen sensor (HO2S) about the fuel/air mixture when idling at both the lower and upper part-load range - If the fuel/air mixture deviates from [lambda]=1 the short-term fuel trim will compensate for this by adjusting injection time so that [lambda]=1 is achieved. When the short-term fuel trim makes an adjustment, the integrator median must be adjusted by the long-term trim. Diagnostic trouble code (DTC) ECM-261A will be stored when the long-term trim must be adjusted to maximum in the lower part of the load area.

Jan 13, 2011 | 1999 Volvo C70

2 Answers

Where is the central elecronic module, I heard there where two. where are they located. Volvo S80 2000 T6


hi before you toutch it were you aware that volvo have recaled all 2000 s80 due toa software defect to there module hot line number 1 88883274236 please rate this answer thanks and i hope this helps

Nov 20, 2009 | 2000 Volvo S80

1 Answer

2000 volvo s80


0237 is turbo/ super boost sensor a circuit malfunction
0236 is turbo/ super boost sensor a ckt range performance

Mar 25, 2009 | 2000 Volvo S80

1 Answer

2004 S80 Volvo Driver door locks


drivers door module is bad

Mar 20, 2009 | 2004 Volvo S80

Not finding what you are looking for?
2003 Volvo S80 Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...