Question about 1998 Chevrolet Corvette

2 Answers

Wipers wont shut off

Wipers will not shut off on my 2002 corvette. replaced circuit module for wipers still does not work

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My car did the same think, I had to replace motor, and then it happened again, the debri keeps clogging the motor, my mechanic made a cover for motor.

Posted on Jul 31, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Check to make sure you are getting power to the wiper motors. Also check relay. Either one could be bad.

Posted on Jul 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do wipers turn on by themselves and won't shut off in 1979 Corvette


the park switch inside the wiper motor is failing you will need to replace the wiper motor assembly

May 29, 2015 | 1979 Chevrolet Corvette

1 Answer

Replaced wiper motor still not working fuse good power to motor is switch or module most likely cause


What you should have done, was worked off a wiring diagram

You study your circuits first-- then go to the vehicle with them

You test at the wiper motor & work your way back, if you do not
have the voltage your should have at the various wires, at the motor

Nov 14, 2014 | 2002 Lincoln Town Car

1 Answer

Winsheild wiper will not work


The wiper control module is probably at fault ,without test that is just a guess . The wiper/washer switch is a input to the wiper control module. Do you know anything about automotive electronics an electrical systems ?
  • The Wipers are Inoperative
  • Fuse.
  • Wiper motor.
  • Multi-function switch.
  • Circuitry.
  • Wiper control module.
  • GO to Pinpoint Test B .

Voltage drop testing the power an ground circuits for the wiper control module would be a good place to start . Do you know how to test electrical circuits with a volt meter ?
PINPOINT TEST B: THE WIPERS ARE INOPERATIVE CONDITIONS DETAILS/RESULTS/ACTIONS B1 CHECK FUSE JUNCTION PANEL FUSE 16 (30A)
Fuse 16 (30A)

  • Is the fuse OK?
Yes GO to B2 .

No REPLACE the fuse. TEST the system for normal operation. If the fuse fails again, CHECK for a short to ground. REPAIR as necessary. B2 CHECK FOR VOLTAGE TO THE WIPER CONTROL MODULE - CIRCUIT 65 (DG)
Wiper Control Module C294
Measure the voltage between wiper control module C294-2, circuit 65 (DG), and ground; and between wiper control module C294-11, circuit 65 (DG), and ground.
  • Is the voltage greater than 10 volts?
Yes GO to B3 .

No REPAIR circuit 65 (DG). TEST the system for normal operation. B3 CHECK CIRCUIT 57 (BK) FOR OPEN Measure the resistance between wiper control module C294-3, circuit 57 (BK), and ground; and between wiper control module C294-5, circuit 57 (BK), and ground.
  • Are the resistances less than 5 ohms?
Yes GO to B4 .

No REPAIR circuit 57 (BK). TEST the system for normal operation. B4 CHECK THE MULTI-FUNCTION SWITCH
Multi-Function Switch
Check the multi-function switch; refer to Section 211-05 .
  • Is the multi-function switch OK?
Yes GO to B5 .

No REPLACE the multi-function switch; REFER to Section 211-05 . TEST the system for normal operation. B5 CHECK CIRCUIT 993 (BR/W) FOR OPEN Measure the resistance between multi-function switch C269-4, circuit 993 (BR/W), and wiper control module C294-7, circuit 993 (BR/W).
  • Is the resistance less than 5 ohms?
Yes GO to B6 .

No REPAIR circuit 993 (BR/W). TEST the system for normal operation. B6 CHECK CIRCUIT 589 (O) FOR OPEN Measure the resistance between multi-function switch C269-1, circuit 589 (O), and wiper control module C294-1, circuit 589 (O).
  • Is the resistance less than 5 ohms?
Yes GO to B7 .

No REPAIR circuit 589 (O). TEST the system for normal operation. B7 CHECK THE WIPER CONTROL MODULE OUTPUT FOR VOLTAGE
Wiper Control Module C294

Wiper Motor C152
Turn the multi-function switch to the HI position. Measure the voltage between wiper motor C152-4, circuit 57 (BK), and wiper motor C152-3, circuit 56 (DB/O).
  • Is the voltage greater than 10 volts?
Yes REPLACE the wiper motor; REFER to Motor-Windshield Wiper . TEST the system for normal operation.

No GO to B8 . B8 CHECK CIRCUIT 57 (BK) FOR OPEN Measure the resistance between wiper motor C152-4, circuit 57 (BK), and ground.
  • Is the resistance less than 5 ohms?
Yes REPLACE the wiper control module; REFER to Module-Windshield Wiper . TEST the system for normal operation.

No REPAIR circuit 57 (BK). TEST the system for normal operation.

Jun 29, 2017 | 2002 Lincoln Town Car

1 Answer

2002 corvette windows worked this AM, not this afternoon. i'm looking at the owners manual on line section 6-71 and 6-72 but don't see the circuit breaker for the windows. i tried mini fuse #33...


IF CIRCUIT BREAKERS AND MINI FUSES OK, MOST LIKELY THE MASTER SWITCH FAULTY. OR ONE OF THE BUTTONS IS STUCK, VERY RARE FOR BOTH WINDOW MOTORS TO FAIL AT SAME TIME, ALSO I THINK WINDOWS ALSO HAVE A MODULE EITHER IN THE DRIVERS DOOR PANEL OR UNDER DASH, THAT WOULD ALSO CAUSE PROBLEM.

Aug 27, 2011 | 2002 Chevrolet Corvette

1 Answer

Windshield wipers will not turn off until the fuse is taken out


I've diagnosed and repaired this problem twice on C5's. Both times I had to replace the wiper module (it's the printed circuit board mounted on the wiper motor).

Sep 18, 2010 | 1998 Chevrolet Corvette

1 Answer

My winshield wipers will not shut off on a 2002 corvette , any thoughts?


I had the same thing on my Vett, it turn out to be the wiper motor, the circuit broad was bad in the wiper motor it self, replace it.

Jul 19, 2010 | 2002 Chevrolet Corvette

1 Answer

I have replaced wiper motor 4 times last three years, wipers come on by them self run minute or 2 shut off, and it seems to start after I use touchless car wash. After I replace motor wipers work fine for...


This is really an easy fix. The wiper motor assembly is on the firewall, just right of center. The wiring can be unplugged before the circuit board is removed, or afterward. I found it easier to unplug it after the circuit board was removed. There is a flat cover that is held on with three torx screws (T20). Remove those screws and remove the cover.
The circuit board will now be visible. Remove the circuit board by grasping the wiring connecter and gently pulling it towards the front of the vehicle. When the circuit board has fallen free, unplug it from the wiring harness if you haven't already done so.
The solder joints that connect the wiring socket to the board go bad on the board.  Just resoldered those and re-installed the circuit board. 

Good luck and hope this helps. keep me posted, be glad to help.

Jun 15, 2009 | 1999 Chevrolet Corvette

2 Answers

My wipers just stoped working in my 2002 corvette. i checked the fuse and its fine. The washer fliud pumps and sprays but wipers dont move and make no noise...? Any help


Sounds like the wiper motor is shot. You can check for electric voltage at the motor using a meter to make sure it is getting power first.

May 04, 2009 | 2002 Chevrolet Corvette

3 Answers

Wipeers wont shut off


My 2001 Chevrolet Malibu had the same problem. The wipers would not stop. wipers wouldn't turn off. The problem was the wiper control module filled with water, seals break down with time. The wiper control module is attached to the front of the wiper motor under a black cover (three screws). I had to remove both wiper arms and the plastic debris guard between the window and the hood. Unplug the harness attached to the wiper motor, remove the three screws. The board is in te plastic cover. I pulled board out. dried it, put it back in and sealed the compartment with silicon. Works like new.

Sep 09, 2008 | 1999 Chevrolet Corvette

Not finding what you are looking for?
1998 Chevrolet Corvette Logo

Related Topics:

419 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...