Idk, but I know it is a high clearance engine. So, if the timing belt breaks, the valves won't hit your pistons, and no internal damage will occur.
SOURCE: Does a ford Ranger have a PCV valve???
it should be on top of the valve cover.. all cars and trucks have them but sum and not many have 1's that never need to be replace..
SOURCE: where is the pcv valve located on a 2003 ford ranger
SOURCE: Engine tappet clearances
According to http://freespace.virgin.net/tommy.sandham/databook.htm# Rocker Adjustment, the cold clearance is .008" intake/.018" exhaust in the non-GT 1500cc, and .012" intake/.022 exhaust on the GT. Sweet little car!!!
SOURCE: Need Valve clearance for '93 kh ford laser
0.10 - 0.15mm inlet
0.18 - 0.23mm exhaust
but you must be carefull because the top of the valve seat becomes concave from wear, a feeler guage will not give the most accurate reading, hope i have been of some hel
SOURCE: how to adjust valve clearance on a 1999 sunfire
There is no valve adjustment for that engine, Hydraulic lifters, You might remove the valve cover and see if you have a rocker arm loose
1,897 views
Usually answered in minutes!
×