Question about 2002 Toyota Camry

2 Answers

Instrument panel, fuel gage, speedometer, not working.

Posted by on

  • Anonymous Mar 18, 2014

    no lights on instrument panel speedometer won't work

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 41 Answers

Look in your fuse box and see if the fuse for the instrument panel is blown. Consult your owners manual to locate fuse box. I may also be a fuse under the hood where there is a fuse box too. hope this helps

Posted on Jul 13, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

You may have a faulty fuel sending unit, an improper ground connection to the unit, or a malfunctioning guage. The problem with the speedometer may be your VSS (Vehicle Speed Sensor) or a problem with the connection to the sensor.

Posted on Jul 13, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: instrument panel

which 1?

Posted on Aug 09, 2008

  • 1 Answer

SOURCE: instrument panel guages don't read accuratly

I have a chevy cav 03 and my problem is just in the gas guage and temp guage now i cant seem to figure out how to fix it but for a quick fix i have jut been pulling out the instrument panel fuse and putting it back in it seems to fix t

Posted on Apr 05, 2009

  • 208 Answers

SOURCE: All of my gages- fuel, speedometer not working

did you check your fuses???

Posted on Jun 22, 2009

pippall
  • 1486 Answers

SOURCE: My 2003 Saturn Vue instrument panel stopped

The plug at the back of the panel has come lose.Remove the dash panel and push plug on firmly.Hope that was helpfull.

Posted on Aug 08, 2009

  • 98 Answers

SOURCE: speedometer doesn't work and fuel gage doesn't

if you open your fuse box, on the face of the box by the fuses you should see gauges printed with an arrow

Posted on Mar 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse located for the gages in a 2006 cadillac cts


Doesn't have a fuse just for the gauges . B+ power supply for the whole instrument cluster . Gauge info comes from the BCM - body control module an the PCM - powertrain control modules over serial data network (GMLAN ) The instrument cluster has electronics inside ,plus software . GM did have stepper motor problems in their instrument clusters from 2003 to 2006 . Your best bet , take it to a qualified repair shop.
How to repair GM Instrument Cluster Speedometer Gauge Stepper
Engine Coolant Temperature Gage
The engine control module (ECM) sends the coolant temperature to the instrument panel cluster (IPC) via serial data circuit. The IPC receives serial data messages from the BCM indicating the engine coolant temperature. The engine coolant temperature (ECT) gage, if equipped, defaults to 75°C (160°F) or below if:
• The ECM detects a malfunction in the ECT sensor circuit.
• The IPC detects a loss of serial data communications with the ECM.
Refer to Cooling System Description and Operation for more information.
Speedometer
The instrument panel cluster (IPC) displays the vehicle speed based on the information from the engine control module (ECM). The ECM sends a 4,000 pulse per mile signal to the cluster discretely. The IPC calculates the vehicle speed using the time difference between consecutive pulses. The speedometer will default to zero if the time duration since the last speed pulse is greater than or equal to one second.

Fuel Gage Description and Operation
The ECM uses the signal circuits of the primary and secondary fuel level senders to calculate the percentage of fuel remaining in the fuel tank. The ECM supplies 5 volts via the 5 volt reference circuit and also provides a low reference to the primary and secondary fuel level senders. When the fuel tank is full, the resistance of both fuel level senders are high and the ECM senses a high signal voltage on both the signal circuits of the primary fuel level sender and the secondary fuel level sender. When the fuel tank is empty, the resistance of both fuel level senders are low and the ECM senses a low signal voltage on both the signal circuits of the primary fuel level sender and the secondary fuel level sender. The engine control module (ECM) sends fuel level information to the instrument panel cluster (IPC) via serial data circuit. The instrument panel cluster (IPC) displays the fuel level information in the fuel gage. When the fuel level is less than a predetermined value, the low fuel message displays in the driver information center (DIC).
The fuel gage defaults to empty if:
• The ECM detects a malfunction in the fuel level sensor circuit.
• The IPC detects a loss of serial data communications with the ECM.

Apr 17, 2018 | Cadillac Cars & Trucks

1 Answer

My speedometer tack fuel Gage temperature Gage quit working but dash lights work


What make , model an year vehicle ? If a GM vehicle 2003 to 2006 stepper motors in the instrument cluster are bad .
How to repair GM Instrument Cluster Speedometer Gauge Stepper

Oct 20, 2017 | Cars & Trucks

1 Answer

My 2000 Chevy s15 Rpm and Gas Gauge is not working


I didn't see an s15 in that model year, in my database?
If the speedometer works but the tach doesn't, I think something is wrong with instrument cluster?
GM has had a problem with fuel gage sending units. The sending units are not hard wired to instrument cluster, they send signal to pcm, the pcm sends serial data to instrument cluster, telling the cluster the gage settings.
It may be possible to use different size resistors in place of the fuel level sending unit, to see if fuel gage reacts properly to different resistors, if the gage reacts properly, then I think the problem is the fuel gage sending unit.

Nov 02, 2016 | Chevrolet Cars & Trucks

1 Answer

Speedometer stopped working after fitting an alarm. What could be the problem?


Put everything back the way it was and see if speedometer starts working again?
Newer instrument clusters, the gages are not hardwired, The cluster receives buss data telling the instrument what to do with gages and speedometer. Checking the speedometer/vss sending unit would be a thought. Hopefully, you didn't hurt the instrument cluster?
What is year--make--model?

Apr 26, 2016 | Cars & Trucks

1 Answer

Yhat could be so true but none of my gages work speedometer fuel rpm the want to work the car still is running smoothly


first check all your fuses and relays, if they all check good you may need to have the instrument panel repaired

Oct 13, 2015 | Cars & Trucks

1 Answer

What would cause just the speedometer and odometer to not work?


If the odometer is analogue then it could be a broken speedo cable!

Nov 04, 2014 | Cars & Trucks

Not finding what you are looking for?
2002 Toyota Camry Logo

1,011 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...