Question about 1992 Chevrolet K1500

1 Answer

Fuel pump wont run with key in on position but

Fuel pump quit running so I put a new one in and it still wont run, changed the relay, fuse isn't blowed, but runs when you crank the engine over, truck still wont start and pump dont run very strong

Posted by on

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 148 Answers

First thing to check power at the plug at the pump itself if you have 12 volts there, make sure the ground wire has a good connection at the frame rail,if thats good the pump wire that runs thru the fuel pump hanger maybe broken

Posted on Jul 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 bmw 325i cranks but wont start.Has fire to plugs,checked fuel pump fuse, relay and main relay,no ground to fuel relay socket,no hot or ground going to fuel pump,,suspect DME ??? Was running fine un


Try to disarm the alarm system first,if that doesn't work,try your spare key,if it works the key is faulty.if this fails,put it on diagnostic machine.,since it can be EWS.

Oct 18, 2014 | BMW 325 Cars & Trucks

1 Answer

My car wont start up


First of all, the new fuel pump may be bad. disconnect line at fuel filter where it goes through filter. and see if fuel flows, or have someone to put hand flat on bottom of tank and try to start car. if fuel pump is working you will feel a vibration on tank. if it does not work, check the fuel pump fuse in fuse box before you exchange it.and or the fuel pump relay! when car is running it runs constantly, when you simply turn key to on position, it runs for about 3 seconds(until fuel pressure in line comes up. and then cycles off.

Apr 05, 2014 | 2000 Chevrolet Malibu

2 Answers

2003 gmc savanna, fuel pump wont work, installed new punp and ignition cylinder, turns over but wont start. I put the key to on position and let it sit for 15 min and still wont start


Check pwr to pump with test light while somebody turns key on and off, if pwr check ground from pump to frame, if no pwr check fuel pump relay

Nov 03, 2013 | 1999 Cadillac Eldorado

1 Answer

My 1995 GMC jimmy isn't getting power to the fuel pump, I put in a new relay and thats not it , What do I do?


firstly remove the fuel pump from the tank and test it by connecting the leads from the pump to a 12 volt battery....if the pump turns on then test the wires running from the pump to the front of vehicle.....since you have replaced the relay then that is not the issue also some vehicles have two sets of fuse blocks instead of the standard one ......does the pump spin up at all when you turn your key to the first position without starting the engine? if it does then you need to test the fuel pressure getting to the intake....i replaced a pump recently that was only pushing 8psi to the engine instead of the needed 52-66psi new pump fixed the whole issue

Dec 21, 2012 | 1994 GMC Jimmy

1 Answer

Have changed fuel pump in 2002 jeep liberty and it wont start,yet when u spray gas into throttle body it will run


Obviously the new fuel pump isn't running

Get a wiring diagram of that circuit and find
out why

Do you hear the pump when you cycle the key?

Did you check fuel pressure before & after the
pump change?

Fuse good,grounds & pump harness connector?

Correct pump?

Apr 22, 2011 | Jeep Liberty Cars & Trucks

3 Answers

My car wont strat? my wife run it out of gas. now it wont strat and its got a 1/4. of gas in it.


It might just need primed Josh. Turn the key on for 10 seconds, and off for 10 seconds. Do this about 8-10 times. If this doesn't work, check your fuel pump fuse/relay or reset button if you have one.

Mar 08, 2011 | 2000 Oldsmobile Alero

1 Answer

Hi have trouble locating fuel pump relay switch i think it may need new fuel pump but trying the cheapest way first when i turn key it turns over like it wants to start but will not start if u pour fuel...


the fuel pump has 2 fuses 1 in the engine compartment fuse box and 1 in the fuse box inside dash. Also the fuel pump relay is located in the glove box on the passenger side their is 3 relays in there. If you put your hand on the relays and turn the key to the on position you should feel it click and then you will know which one it is. If you do not feel it then this is likely your problem but check the 2 fuses first.

Feb 24, 2011 | 1997 Chevrolet S-10 Pickup

4 Answers

OK i have a 1999 gmc Yukon i just changed the fuel pump spark plugs ing coil control module wires but she still wont crank she starts then shuts off whats wrong HEPL ME PLZ


I suppose that you mean it starts but doesn't continue to run. And if you try to start it right away it'll just crank. The fuel pump is on in crank but not in run ( maybe ). Find the fuel pump relay in the underhood fuse relay panel and use a test light to cheak the pins for power and ground. First with the test light hooked to a good ground, check to see if it works first ( touch the battery positive ) then touch all the pins of the relay ( removed ) One should be hot all the time ( if not the fuel pump fuse is blown) another should be hot with the key on. one of the others will be hot only in crank ( this is the fuel pump) The last other is ground with the engine running after started. The one thats hot in crank put power to it with a jumper wire and start the engine ( it'll run ) the fuel pump also gets turned on by the oil pressure switch and the fuel pump fuse is blown it'll also not run the engine. But it'll run right after it's cranked and quit

Nov 14, 2009 | GMC Yukon Cars & Trucks

4 Answers

My 1993 chevy 1500 Silverado truck suddenly quits


I put a new fuel pump, fuel filter, and a fuel pump relay and the fuel pump is still not coming on. I am not getting any fuel. Can you please tell me what it might be.

Mar 08, 2009 | 1993 Chevrolet C1500

1 Answer

1995 Ford Tauras dies while running,


can you hear pump running when you turn key to the on position? if not it could be fuse or relay.if it does run take a fuel pressure chk.just because you put a new pump in does not mean it could not be bad it happens. this is worst case senerio. go fore fuse or relay. good luck. OLD SCHOOL.

Jan 10, 2009 | 1995 Ford Taurus

Not finding what you are looking for?
1992 Chevrolet K1500 Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...