Question about 2005 Dodge Caravan

1 Answer

Need to change lightbulbs on instrument panel

I need to change two lightbulbs on my instrument panel. I've got the dead bulbs out, but I can't get the bulb to separate from the gray plastic socket. Tried pliers and everything. help?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 109 Answers

Go to your local Chrysler dealer a buy the proper bulbs, they come complete and proper wattage, and they are cheap in price. word of caution replace all the illumination bulbs, when one is black the rest will follow. GOOD LUCK RDJRP

Posted on Aug 07, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Instrument panel some lights out(2001 aurora). How do I change the bulbs?

Cluster lights are soldered into the pc board, You need to remove the trim around the cluster, then the cluster itself. Find out what lights are out when the cluster is still in place, This is quite difficult because you have to remove the gauge needle(s) gas speedometer and tach, then the cluster can be separeted from the glass part. I ordered the lights from ebay, I hear that radio shack has some lightbulbs that might work as well. Don't forget that they are soldered in place they are not light bulbs that can be twisted or pulled off, good luck if you attemp to do this.

Sep 22, 2011 | 2001 Oldsmobile Aurora

1 Answer

What does the yellow lightbulb symbol mean on the instrument panel of a 2001 diesel jetta?

That means you have burnt bulb on a head lights,turn signals,bracke lights or parcking lights.Check all of them and you will find the wrong one.

Jun 11, 2011 | 2001 Volkswagen Jetta TDI

1 Answer

I need to change the Lightbulb on the 3rd

normally there 2 screws on the lense, usually going through into the body. phillips head or torx head. just take those out and pull the unit straght out, and the bulb is right there. if you have a cargo light on it, those bulbs will usually be on the outboard side of the brakelight, on either side of it. once you change the buld, wipe the new one with rubbing alcohol to remove the oil from your skin. the bulb will last much longer if you do that

Jul 20, 2009 | 2002 Chevrolet Blazer

1 Answer

How to change a instrument panels lightbulb ?

Unfortunately you must remove the cluster to gain access to these bulbs. Remove radio, heater fan knobs, temp slider knobs,and temp control faceplate (carefully remove bulb in faceplate), then remove the Phillips screws inside the holes where these came out that hold the cluster . unscrew or unclip and remove the speedo cable from the back of the cluster. you may have to disconnect some electrical jacks (remember where and how they go back in!) to gain complete access. Then it's just a matter of pulling out the little bulbs and replacing them. Because this is so involved I would replace ALL of them at once. Hope this helps...;-)

Apr 09, 2009 | 1993 Volkswagen Golf

1 Answer

Dash board light out on fuel gauge

You will have to remove the screws to the instrument panel, pull off the panel and replace the lightbulb

Apr 01, 2009 | 2004 Honda Accord

1 Answer

How to change break lightbulb

open the trunk
remove the trim panel.
remove the 3 plastic (wing nut) retaining nuts.
Pull the housing out disconnect the bad bulb by twisting counterclockwise.
Replace reverse of removal.

Jan 20, 2009 | 1989 Chevrolet Beretta

1 Answer

How to change lighbulbs behind the panel board of 1998 Toyota Corolla?

Using a short phillips screwdriver, remove the 3 screws that holds the fascia over the plastic inst panel lens. Pull this fascia towards you, and remove it from the dash. With the fascia out of the way, you will see 4 screws holding the instrument cluster to the instrument panel. Remove the 4 screws. Pull the instrument pod towards you, and, working behind the pod, disengage all of the wire connectors behind the pod. When all of the wire connectors are removed, take the pod from the dash, and look at the back side; the bulbs are accessible there. The bulbs are not special; hope this helps, and THANK YOU for choosing FixYA!

Oct 21, 2008 | 1998 Toyota Corolla

Not finding what you are looking for?
2005 Dodge Caravan Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides