Question about 2000 Chrysler Grand Voyager

1 Answer

Change belts on 2000 grand voyager With air 3.0L Witch way to loosen belt on air condition power steering pulley? power steering?

Posted by on

  • Anonymous Mar 29, 2014

    HOW TO ADJUST POWER STEERING BELT ON A 3.0 LIMITED

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 363 Answers

The standard is left out right in, or counterclockwise out and clockwise in, turn bolt to the left

Posted on Jul 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Power Steering reservoir leaking and dripping on Serpentine Belt, possible cause of loose belt movement (has come off once already). Wobble of A/C Pulley, resulting in A/C not cooling.


Power steering pump shaft seal is leaking, You can add a table spoon of DOT 3 brake fluid to the steering fluid to condition the seal. The A/C pulley wobble is a compressor clutch bearing problem and requires the correct puller to replace. Replace the clutch as a unit, to avoid messing with the bearing. Replace the belt if the steering fluid leak stops. If the brake fluid trick does not work, replace the steering pump. Parts and labor will be better than 200.00

Aug 25, 2017 | 1999 Plymouth Grand Voyager

1 Answer

How do I replace the serpentine belt on a 1994 concorde?


Remove the alternator/power steering pump and water pump drive belt to gain access to the air conditioning drive belt.
To remove and install the air conditioning compressor drive belt, first loosen the tensioner pulley lock nut, then turn the adjusting screw to raise or lower the tensioner pulley assembly Accessory Drive - 3.3L Engine or Accessory Drive - 3.5L Engine To adjust the air conditioning drive belt, loosen the tensioner pulley nut and adjust belt tension by tightening adjusting screw. Torque pulley nut to 54 N•m (40 ft. lbs.) after adjustment.
The Poly-V generator/power steering belt has an adjustable tensioner pulley located on the timing belt cover Accessory Drive - 3.5L Engine to maintain proper belt tension. To remove or install this belt, Release tension by loosening the tensioner pulley nut and adjustment bolt Accessory Drive - 3.5L Engine Reverse procedure to install and tighten belt to specified tension.

Jul 10, 2012 | 1994 Chrysler Concorde

1 Answer

Need belt routing diagram for 2001 chrysler sebring lxi


Thanks for using FixYa.




jturcotte_2444.gif

Fig. Accessory drive belt routing-2.7L engine
Chrysler Cirrus & Sebring Convertible; Dodge Stratus; Plymouth Breeze



jturcotte_2445.gif

Fig. Accessory drive belt routing-Chrysler 2.7L engine





2.7L Engine
A/C & Alternator Belt

  1. Raise and safely support the vehicle.
  2. Remove the right front wheel and belt splash shield.
  3. Loosen tensioner locking bolt and pivot bolt.
  4. Rotate tensioner clockwise to allow enough slack to remove belt

To install:
  1. Install the air conditioning compressor/alternator belt on pulleys, tensioner in slack position, slip belt over idler last.
  2. Adjust drive belt tension.
  3. Install the belt splash shield and right front wheel.
  4. Lower vehicle.
    jturcotte_2446.gif

    Fig. Installing A/C & alternator belt-2.7L engine


  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Raise and safely support the vehicle.
  3. Remove the right front wheel and belt splash shield.
  4. Loosen the tensioner locking bolt and pivot bolt.
  5. Rotate tensioner clockwise to allow enough slack to remove the belt

To install:
  1. With the tensioner in a slack position, install the Air Conditioning (A/C) compressor/alternator belt on the pulleys. Slip the belt over the idler last.
  2. Adjust the drive belt tension.
  3. Install the belt splash shield and right front wheel. Tighten the wheel lug nuts to 100 ft. lbs. (136 Nm).
  4. Lower the vehicle.

Power Steering Belt
  1. Raise and safely support the vehicle.
  2. Remove the right front wheel and belt splash shield.
  3. Remove the air conditioning compressor/alternator belt.
  4. Loosen belt adjusting bolt. It is not necessary to loosen the pivot bolt on the power steering pump. There is a bushing incorporated into the power steering pump/bracket that allows it to pivot.
  5. Remove the power steering belt.

To install:
  1. Install the power steering belt on pulleys.
  2. Adjust drive belt tension.
  3. Install the air conditioning compressor/alternator belt.
  4. Install the belt splash shield and right front wheel.
  5. Lower vehicle.


Oct 27, 2011 | Cars & Trucks

1 Answer

I have a broken belt that goes on the same pulley that another belt is already on. What all do I have to remove to be able to put the belt on. I guess the belt that needs put on is for the heat & air...


A/C Compressor Belt
  1. Remove the alternator/power steering and water pump drive belt to gain access to the air conditioning belt.

  2. Loosen the tensioner pulley locknut, then turn the adjusting screw to raise or lower the tensioner pulley assembly. Remove the belt.

To install:

  1. Install the belt.

  2. To adjust the belt, loosen the tensioner pulley nut and adjust the belt tension by tightening the adjusting screw. Tighten the pulley nut to 40 ft. lbs. (54 Nm) after adjustment.

  3. Install the alternator/power steering and water pump drive belt and adjust.

  4. Start the engine and check for proper belt alignment and any abnormal noise.

Nov 01, 2010 | 1995 Dodge Intrepid

2 Answers

Looking for a belt tensioner for a 1997 Jeep Cherokee Country. Where would I look? Perhaps I am not calling it by its correct name as no one can even guess what I am looking for...Thanks!


Do you mean the tensioner pulley?

Then, I would look for something with a 1/2" square hole in a pivoting spring loaded pulley that is designed to put 'tension' on the serpentine belt.

Depending on the engine, it can be located in various positions.

---
REMOVAL & INSTALLATION - 8 cylinder engine Alternator Belt
  1. Loosen the alternator mounting and adjusting arm bolts.
  2. Pivot the alternator inward and remove the belt from the vehicle. To install:
  3. Install a new belt.
  4. Holding the alternator in place to maintain tension, tighten the alternator mounting and adjusting arm bolts.
Power Steering Belt
  1. Loosen the adjusting and mounting bolts on the front face of the steering pump cover plate (hub side).
  2. Pivot the power steering pump inward and remove the drive belt. To install:
  3. Install the drive belt.
  4. Holding the pump in place, tighten the adjusting arm bolt and the mounting bolts.
Air Conditioning Compressor Belt
  1. If the engine is equipped with an idler pulley, loosen the idler pulley adjusting bolt and remove the belt.
  2. If not equipped with an idler pulley, loosen the adjusting and mounting bolts.
  3. Pivot the air conditioning compressor inward and remove the drive belt.
  4. Installation is the reverse of removal.
Air Pump Drive Belt
  1. Loosen the adjusting arm bolt slightly. If necessary, also loosen the mounting bolt slightly and remove the drive belt. To install:
  2. Holding the pump in place, install the drive belt, then tighten the adjusting arm bolt and the mounting bolt.

Oct 17, 2010 | 1997 Jeep Grand Cherokee

1 Answer

2001 ford tarus belt diagram picture


Please rate highly if this helps. Good luck.

3,0L 2 Valve

41386ca.gif
Item Part Number Description 1 3A733 Power steering pump pulley 2 8620 Drive belt 3 2E884 A/C clutch pulley 4 6316 Crankshaft pulley 5 6B209 Drive belt tensioner pulley 6 10344 Generator pulley

Item Part Number Description 1 10346 Generator pulley 2 8678 Belt idler pulley 3 3A733 Power steering pump pulley 4 8620 Drive belt 5 2E884 A/C clutch pulley 6 6B209 Drive belt tensioner pulley 7 6312 Crankshaft pulley 8 8509 Water pump pulley

3.0L 4 valve

668e212.gif

Sep 09, 2010 | Ford Taurus Cars & Trucks

1 Answer

I need a new timming belt on a 01 kia sephia how do i change it


Hi there,

Below are the procedures to remove the timing belt...

1. Disconnect negative battery cable.

fd440e5.jpg
2. Loosen power steering lock bolts and nuts accordingly and remove tension from power steering (P/S) and/or air conditioning (A/C) compressor drive belt. 3. Remove P/S and/or A/C drive belt.

1d207cf.jpg

4. Loosen generator mounting bolts and adjusting bolt. 5. Remove generator bolts.


077a275.jpg

6. Remove water pump pulley.

2bc0452.jpg


7. Remove crankshaft pulley and timing belt guide plate.



8619b52.jpg


8. Remove upper and lower timing belt covers.


c250533.jpg


9. Turn crankshaft so that timing mark on timing belt pulley is aligned with timing mark on engine.


213d3a1.jpg




10. Check that "I" mark on intake camshaft pulley is aligned with mark on cylinder head cover and "E" mark on exhaust camshaft pulley is aligned with mark on cylinder head cover.


Do not move camshaft or crankshaft once timing marks have been correctly positioned.



a3188ba.jpg



11. Loosen tensioner pulley lock bolt.
12. Protect timing belt with a rag.
13. Remove tensioner pulley.


12101a7.jpg

14. Remove timing belt.



Regards,
Jeep Brainy

Sep 20, 2009 | 2001 Kia Sephia

1 Answer

2002 kia spectra timming belt digram needed to verify timming marks. Dual overhead camshaft.


  1. Disconnect battery negative cable.
  2. Remove power steering and air conditioning compressor drive belt by loosening power steering fasteners.
  3. Remove generator bolts and generator belt.
  4. Remove water pump pulley.
  5. Remove crankshaft pulley and timing belt guide plate.
  6. Remove upper/lower timing belt covers.
  7. Turn crankshaft clockwise until "I" mark on intake camshaft pulley and "E" mark on exhaust camshaft pulley align with marks on cylinder head cover.
48d7b82.gif

Aug 29, 2009 | 2002 Kia Spectra

1 Answer

Belt came off 1998 chrysler sebring lxi


you have two belts . put the large belt on first . it goes around crank pulley air conditioning pulley alternator pulley.loosen tension pulley to adjust belt. tension. then you put the other belt on power steering pump pulley and crank pulley. adjust belt tension loosen power steering pivot bolt. that it.

Mar 16, 2009 | 1998 Chrysler Sebring

Not finding what you are looking for?
2000 Chrysler Grand Voyager Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...