Question about 2001 Hyundai Elantra

1 Answer

To much play in clutch - 2001 Hyundai Elantra

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 382 Answers

As this is a hydraulic system i suggest you start of by following a proper bleeding procedure the peddle should return to normal if not check pivot points for abnormal wear .worst case cenario replace clutch

Posted on Jul 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to adjust the clutch on a 1999 Ford escort ZX2


The clutch is not adjustable it is fully hydraulic. That means it is self adjusting, if the clutch pedal engages high on the pedal and the clutch is hard to push you need a new clutch plate and pressure plate.

Mar 18, 2017 | 1999 Ford Escort

1 Answer

What could be the reason for clutch slipping on my 2002 Hyundai elentra


It may be a simple adjustment
Check the clutch pedal with your hand, move it up and down gently to determine how much "free play" there is before you meet resistance. If there is no free play the clutch will not be fully released.
If the free play is ok it may mean you need a new clutch plate as the friction plates are worn.

Jun 11, 2016 | Hyundai Cars & Trucks

1 Answer

Adjust a clutch on 2005 toyota echo


CLUTCH ADJUSTMENT:
(a) Check that the pedal free play and push rod play are correct.
(1) Depress the pedal until clutch resistance begins to be felt.
Pedal free play:
5.0 to 15.0 mm (0.197 to 0.591 in.)
(2) Gently depress the pedal until the resistance begins to increase a little.
Push rod play at pedal top:
1.0 to 5.0 mm (0.039 to 0.197 in.)
(b) Adjust the pedal free play and push rod play.
(1) Loosen the lock nut and turn the push rod until the correct free play and push rod play are obtained.
(2) Tighten the lock nut.
Torque: 12 N*m (120 kgf*cm, 8.7 ft.*lbf)
(3) After adjusting the pedal free play, check the pedal height.

Mar 31, 2013 | 2000 Toyota ECHO

1 Answer

Clutch slipping on 20005 subaru outback


Do you have any free play in your clutch pedal? The pedal should move at least 1" before you feel resistance. If you have free play then you probably have a clutch going bad. If there is no free play then you need a clutch adjustment.

Jan 05, 2012 | 2005 Subaru Outback

1 Answer

New clutch fitted.hard to go into reverse+1st when engine running


If there is an adjustment on the clutch somewhere, it should be adjusted so that there is only a little free travel (play) at the top of the pedal range. No play at all... puts continuous pressure on the throwout bearing (not good)... tooo much play doesn't allow for full travel of the clutch mechanism to dissengage the clutch fully.
ALSO a clutch disc installed backwards (usualy not possible) or a clutch disc that got bent during instalation (hanging transmission from clutch) has a wobble that causes it to drag even though the cover is providing the propper relief space

Oct 29, 2011 | 2006 Peugeot 405

1 Answer

1997 Probe Gt, 5 speed, 2.5 L V-6; 77,750 miles: replaced clutch master cylinder 11/15/2010. Clutch free play okay, pressure to push clutch pedal down- okay (these conditions apply to vehicle after...


THe problem can only really be with the clutch master cylinder. What you describe sounds like the master cylinder is not relieving pressure and this is building up in the salve cylinder, applying pressure to the pressure place and causing the clutch to slip. Can you make the problem go away even temporarily, if you open the bleed screw on the slave cylinder? You say that the free play is correct, but is the master cylinder returning fully to its released position?

Jan 26, 2011 | Ford Probe Cars & Trucks

1 Answer

The clutch pedal on Suzuki vitara two litre V6 1998 goes to about inch of floor before activation. Clutch does not slip just too much pedal travel. Is it possible to adjust it? ...


prev.gif next.gif Clutch ADJUSTMENTS 1997-98 Models CLUTCH PEDAL HEIGHT The clutch pedal height should not be a periodic adjustment but may be checked after components of the mechanical clutch system have been replaced. The proper clutch pedal height should be 0.2 in. (5mm) above the brake pedal height If adjustment is necessary, loosen the locknut and turn the adjusting bolt until the appropriate height is reached. Once set, keep the bolt from turning and tighten the locknut to secure the adjustment. CLUTCH PEDAL FREE-PLAY The clutch pedal free-play should be checked from time-to-time in order to assure proper clutch operation. The proper clutch free-play should be 0.6-1.1 in. (15-25mm). Fig. 1: Pedal free-play is adjusted at the joint nut (2), while keeping the outer cable nuts (3) tightened around the center cable thread portion 7924hg30.gif
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. If the free-play must be adjusted, turn the joint nut (2) located at the transmission end of the clutch cable in or out, as necessary to achieve the proper play.
  3. Once the correct pedal free-play is obtained, check the free-play on the release arm (c), it should be 0.02-0.06 in. (0.5-1.5mm).
1999-01 Models These vehicles are equipped with a hydraulic clutch system. No adjustment is necessary.

Nov 05, 2010 | 1999 Suzuki Vitara

1 Answer

Clutch slipping


A clutch is usually adjusted from underneath the car if it's a mechanical clutch.

Your comment that there is very little play at the top indicates an improperly adjusted clutch. You should have about 1/2 - 3/4 inch of play before feeling the clutch in the pedal.

Jan 24, 2009 | 2003 Nissan 350Z

1 Answer

Toyota Clutch Pedal Play


Does it work ? if it is not tight to push the clutch then there should be no problem.

Jun 18, 2008 | 2000 Toyota Tundra

Not finding what you are looking for?
2001 Hyundai Elantra Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...