2005 Chrysler Pacifica Touring was stuck in park. Fixed that now key is stuck in ignition. Help? My father replaced a spring however it still isn't releasing the key....

SOURCE: key is stuck

I had this problem too. You have to make sure on the shifter that the knob towards the dash is out. You know the one you hold in while you move the shifter into gear.

SOURCE: Perform Service Light comes on

This is a setting that can be reset to 2000 miles - when it counts down to 0 you get the "Perform Service" alert. I believe if you use the Step function you will see "XX miles to Service" Use the reset button to set this back to 2000.

SOURCE: I SPILLED CHAMPAGNE ALL OVER THE SHIFTING AREA IN

yeah yeah yeah lol... tell you what ... i'll make it so you can rate this... please rate it a fixya.... and if you want to email me.... add @hotmail.com to my name

take care
glad it worked out

SOURCE: 2006 Chrysler Pacifica Auotmatic Liftgate

Yes new gas shocks on the lift gate will fix your problem. I had the same problem on my 2005 Pacifica and when it hit my head- I came up with the solution.

Good Luck,
Ray

SOURCE: program instruction garage door opener in 2005 chrysler pacifica

if your garage motor have rolling codes you need to put your car inside garage near the motor leave ignition on go to the motor locate learn button press it then quickly go to the car and press and hold one of the buttons for approximately 30 sec or until it start blinking rapidly, if you have a regular motor take one hand held opener go inside car ignition on same time press open button on handheld remote and on the car button 30 sec and it should be programmed.