Question about 2003 Honda Accord
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1998 HONDA ACCORD TRANSMISSION
If it is an automatic tranny, i had a similar problem in a 1989 CRX with an auto tranny. Your problem could be your torque converter, You may have knocked it a 1/2in or so when you connected and bolted the motor down to the tranny, in doing so you like i said, budged the torque converter out of its appropiate place. So it may or may not be grabbing like it should.....
If this is the problem, remove the motor from the tranny, (and you might as well replace your seal while at it if you havent), adjust the converter back into place, until it grabs ahold of the tranny, you will feel it, shove it back there. Take note of how it moves and what makes it come out of place, with that in mind, REPUT the tranny back in, bolt it down. Prey thats the problem
Posted on Mar 09, 2009
SOURCE: 92 Accord Automatic shifting
Has anyone change the transmission fluid and used anything other than Honda ATF-Z1. If so, have the fluid/filter changed in this car and use only Honda Fluid. This is the only fluid that you can use in a Honda. Even if you have used the correct fluid an fluid/filter change may help. If that is not the case then I suggest you seek out a trusted professional.
Posted on Aug 08, 2009
You will need to rent a spring compressor or borrow one from advance auto parts. The access ports are usually in the back of the car, some have plastic caps over them usually about 6 inches square and some you have to take the inside trim panel off in the car to gain access. Do not attempt to take the struts out without a spring compressor or you will get hurt as the springs are under a lot of pressure so when un bolted without the proper tool they can come apart and you will for sure need a stich or two.
Posted on Feb 06, 2010
Tips for a great answer:
Sep 24, 2015 | 1998 Honda Civic
Apr 13, 2015 | 2003 Honda Accord
Jan 02, 2011 | 2003 Honda Accord
May 16, 2010 | 2003 Honda Accord
Jun 06, 2017 | 2003 Honda Accord
Apr 15, 2009 | 1996 Honda Accord
Aug 09, 2008 | 1988 Honda Accord 4 Door
Jul 04, 2008 | 2003 Honda Accord
541 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: