Question about 2002 Dodge Neon

2 Answers

Turn Signals not working

I have the same problem. My turn signals do not work on the 2003 neon. The hazard lights work, however.

Were you able to come up with a solution to this?

Posted by on

  • 1 more comment 
  • tmuir1 Jul 12, 2009

    I was under the impression that there was only one flasher relay. If there are two, can you tell me the locations of them?

  • tmuir1 Jul 12, 2009

    I did check the fuses both interior and under the hood. Both were fine. What confuses me is that the hazards still work.

  • Mike Butler
    Mike Butler May 11, 2010

    Have you tried swapping signal flasher with hazard flasher to see if the opposite happens, which would tell you to buy another flasher?

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 57 Answers

Sounds like a bad turn signal switch

Posted on Jul 12, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

This problem is most likely due to a blown fuse for your turn signals. Check the fuses under your driver side console and replace any that have broken connections, use the exact same amperage replacement fuse. There may also be a turn signal fuse in your electrical box under the hood open it up and check those as well. Hope that helps if you are having trouble removing the fuses look for a little tool in the fuse box that can grab and help pull them out.

Posted on Jul 12, 2009

  • seninmartine
    seninmartine Feb 09, 2012

    this solution worked for me . thank's !!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HAZARD AND TURN SIGNAL LIGHTS WILL NOT WORK


Turn signals and flashers not working - MyTractorForum.com - The ...

www.mytractorforum.com/.../193023-turn-signals-flashers-not-working....
Jun 5, 2011 - My turn signals and flashers are not working on my BX1500. I can hear the ... I hear nothing when I depress the hazard button and no light.

Turn Signal and Flasher Repair JD4300 Recovered Part 7 ...

? 19:17
https://www.youtube.com/watch?v=UrLN5xzbOzY
May 9, 2014 - Uploaded by mars1952
Turn Signal and Flasher Repair JD4300 Recovered Part 7 ... I bought a 4310 new in 2004 and I know these are great tractors, not the ... I have a John Deere 4400 and I wouldn't mind putting a set of those on it to protect the lights. .... Ford Explorer 2003 - MyTurn Signals Stopped Working - Duration: 2:15.

Jan 11, 2016 | Cars & Trucks

1 Answer

Why aren't hazard lights or brake lights working?


Brake lights /rear hazard lights not working - Ford Truck ...

www.ford-trucks.com > ... > 1967 - 1972 F-100 & Larger F-Series Trucks
Jul 9, 2010 - After checking the brake lights I tried the emergency flashers and found that they are working in the front but not in the back. I do have rear turn ... 1995 F350 Brake Lights / Turn Signals not working
Jul 9, 2012
Turn Signals and Brake Lights Do Not Work
Mar 10, 2012
Turn Signal, Brake Lights, & Rear Hazard not working
Aug 3, 2010
Rear Turn Signals, Hazards and Brake Lights not working....
Aug 29, 200

Sep 30, 2015 | Cars & Trucks

1 Answer

2000 tacoma flashers don't work but turn sig do work!


The hazard switch gets power from the horn fuse which is hot all the time, and from the turn signal fuse which is hot when the key switch is on. The turn signal switch gets power from the hazard switch and both use the same flasher.
So if the turn signals work but the hazard switch does not power the lights, and both fuses have power, I would say the problem is inside the hazard switch.

Feb 19, 2013 | Cars & Trucks

1 Answer

Stop lights dont work but top center does in 2003 chevy astro


Sound like a bad turn signal switch. I would bet if you wiggled the switch in just the right position the brake lights would turn on.

Jan 26, 2013 | 2003 Chevrolet Astro

1 Answer

Turn signals work sporadically. Hazard lights blink for about 20 seconds then stop. I read online about many other complaints about this. What's the problem?


the hazard flasher module is very common on these. When the turn signals don't work wiggle the flasher button. If the turn signals start working again than the flasher module is bad.

They are readily available in the aftermarket, relatively inexpensive, and easy to replace.

Sep 25, 2010 | 2003 Chevrolet Malibu

1 Answer

Where is the turn signal relay, hazard relay, and flasher for a 2003 Ford F150? My turn signals do not work (inside or outside), but 3 out of 4 outside lights work when the hazards are on, but with only 1...


It is not the flasher if the hazards work, it is 1 flasher for both turn signals and the hazard lamps. It is in a relay block ( along with the blower motor relay ) under the dash, about in line with the steering wheel column ).

Try tilting the steering wheel all the way up, and test again.

The other quick test is to cycle the hazard switch a few times, to see if it cleans the contacts for the turn signal on the MFS,

Apr 01, 2010 | 2003 Ford F150 Regular Cab

3 Answers

Turn signals wont work fuses are good?


the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *** will fix your problem

Aug 30, 2009 | 1999 Pontiac Grand Am GT

1 Answer

2003 kia rio turn signal


I believe without seeing it, that your turn signal assembly may need to be replaced. take it ti Advance Auto or Auto Zone, they will usually check it for free.

Dec 29, 2008 | 2003 Kia Rio

Not finding what you are looking for?
2002 Dodge Neon Logo

898 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...