Question about 2002 Mercury Sable

1 Answer

What is the tubing size for the windshield washer

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 4 Answers

Simple solution is to take a piece of the tubing into any parts store and have them size it for you. Typically you can buy it rubber tubing by the foot. or, measure the inside diameter - the size of the inside hole - with a tape measure. But, then refer to the inside diameter when buying tubing.

Posted on Sep 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size is the y splice on the washer fluid hose


You buy using make and model, or go to a motor factor with the old one.

Google

year make model screen washer replacement parts

or

year make model Windshield Wiper Washer Spray Hose Joint

Mazda Windshield Wiper Washer Spray Hose Joint H001 67 502 OEM 6 87

Jun 13, 2018 | Cars & Trucks

Tip

How To Replace Fix Windshield Washer Pump Nissan Maxima 2004-08 1AAuto.com...


How To Replace Fix Windshield Washer Pump Nissan Maxima 2004-08 1AAuto.com

on Mar 23, 2012 | 2006 Nissan Maxima

1 Answer

How do you replace the windshield washer pump on 2008 ford focus, wipers work but no spray comes out


The hose could be clogged ! Do you know where you add the washer fluid ? Somewhere on the bottom of that plastic bottle is the washer pump .
Removal and Installation
> WARNING: Windshield washer solution contains methanol, which is poisonous. Observe all cautions and warnings indicated on label of washer solution container. Failure to follow these instructions may result in personal injury.
> CAUTION: When replacing the windshield washer pump be careful not to damage the rubber grommet.
> CAUTION: Do not operate the windshield washer pump before filling the reservoir. Failure to do so could result in premature pump failure.
  1. NOTE: When installing the reservoir, the filler neck must be lubricated using a water-based lubricant.
    Remove the bolt and the windshield washer reservoir filler neck.
  1. Remove the RH fender splash shield. For additional information, refer to Section 501-02 .
  1. Remove the foam filler and remove the retainer.
  1. Remove the 2 screws and the accessory drive splash shield.
    • To install, tighten to 5 Nm (44 lb-in).
  1. Remove the nut, 2 bolts and position the A/C accumulator aside.
    • To install, tighten to 9 Nm (80 lb-in).
  1. Unclip the A/C lines from the inner fender well.
  1. Drill out the rivet and remove the bracket.
  1. Remove the 2 bolts, slide the windshield washer reservoir assembly forward to release it, and position the washer reservoir aside.
    • Install the upper bolt followed by the lower bolt, and tighten to 5 Nm (44 lb-in).
  1. Disconnect the windshield washer tube assembly from the pump and release the windshield washer tube assembly from the washer reservoir.
  1. Disconnect the electrical connector from the windshield washer pump.
  1. Release the wiring harness from the reservoir, and remove the washer reservoir.
  1. To install, reverse the removal procedure.

Apr 07, 2015 | Ford Cars & Trucks

1 Answer

What size is the tubing for the washer fluid


You don't need to know that

Remove what you are replacing &
match it up at the parts store

All you need is the length your buying

Feb 19, 2013 | 2003 Pontiac Sunfire

1 Answer

Windshield washer fluid doesn't squirt after windshield replacement


They probably knocked loose one or more of the tubes that carry the washer fluid. Try to trace the lines back from the sprayer nozzles and you may find the problem.

Sep 17, 2012 | 2006 Nissan Frontier

1 Answer

My windshield washer reservoir won't hold washer fluid.


The seam on the windshield fluid container is broken and leaking like crazy.

Jun 10, 2017 | 2001 Oldsmobile Intrigue

1 Answer

Where can i buy a window washer resavoir for my 3.2 jaguar 1996 xj6


WINDSHIELD WASHER FLUID RESERVOIR
Part #: JLM12455 RESERVOIR, WINDSHIELD WASHER FLUID, FITS 1995-1997 XJ6. This is the large lower reservoir the top filler tube will need to be removed from your old reservoir ITS ABOUT 155.00

Aug 10, 2011 | 1996 Jaguar Xj Series

1 Answer

My 2005 Avensis sedan front windscreen washer does not work - wipers do still opperate. Where is the fuse for this located and what else could cause this problem?


PROBABLE CAUSE Impact to the front bumper pushes the bumper back far enough to break the washer pump hose fitting. CORRECTIVE ACTION Replace the windshield washer reservoir and washer motor with updated parts. REPAIR PROCEDURE 1. Turn the ignition switch to ACC (I) to unlock the steering column. 2. Raise the vehicle on a lift. 3. Remove the right front inner fender. Unhook and pull back the bumper for better access. CLIPS (6 places.) SCREWS (6 places.) RIGHT FRONT INNER FENDER 4. Release the hooks on the upper right side of the front bumper. 5. Remove the clip from the filler neck, then remove the filler neck. FILLER NECK CLIP WINDSHIELD WASHER RESERVOIR CLIP WASHER MOTOR CONNECTOR BOLT BOLTS WASHER TUBES 6. Remove the right front fender trim, and disconnect the washer hose from the 90-degree fitting. CLIP FRONT FENDER TRIM FRONT HOSE 7. Disconnect the 2P connector and the two washer tubes from the washer motor. 8. Remove the washer reservoir clip and the three bolts, then pull out the reservoir. 9. Assemble the new reservoir components, but do not install the filler neck. 10. Trim 85 mm off the end of the 1,260 mm washer tube only. 11. Route the washer tubes on the reservoir. NOTE: The black fitting is for the front windshield nozzles, and the white fitting is for the rear nozzle. 85 mm 12. Install the reservoir. 13. Connect the rear tube to the straight fitting in the wheelwell. 14. Connect the 2P connector to the washer motor. NEW RESERVOIR Connect the rear washer tube. CLIP BOLT 9.8 N•m (7.2 lb•ft) 15. Install the filler neck with the original clip. Connect the front washer tube to the 90-degree fitting. Then reinstall the front fender trim. WASHER FLUID DIPSTICK 2P CONNECTOR FRONT FENDER TRIM FILLER NECK CLIP

May 15, 2011 | Toyota Passenger Cars & Trucks

2 Answers

What size tubing do I need for a 2009 pontiac g6 wind shield washer fluid tubing.


A 2009 Pontiac G6 uses the following windshield washer hose:

* 4 X 1mm (OEM Part #: N 20 301 1 5M)

Please see the attached link for additional information.
http://www.carpartsdiscount.com/auto/parts/2009/pontiac/g6/washer_hoses_filters/crp_windshield_washer_hose_4_x_1mm.html?3593=120863

Feb 22, 2011 | Pontiac G6 Cars & Trucks

2 Answers

How do you replace the tubing from the windshield washer bottle? where is the tubing located on 1997 dodge grand caravan?


If you've developed a leak than the problem lies within the washer tank and not the lines. If your washers just aren't squirting then you've got to clean the nozzles on the hood. The washer feed lines are very rarely at fault unless the vehicle has had a fire. Thank you, Dana

Nov 15, 2009 | 1997 Dodge Caravan

Not finding what you are looking for?
2002 Mercury Sable Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

gerry bissi

Level 3 Expert

4376 Answers

Marvin
Marvin

Level 3 Expert

81424 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...