Question about 1998 Chevrolet Venture Cargo

2 Answers

I just replaced the front pads amd rotor on my 98 venture and now I get a scraping noise when I make a right turn? What is it and how do I correct it?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had a 2000 venture with the same problem. I corrected the problem by changing the disks. The problem all started when I had my brakes done and they shaved the disk to much.

Posted on Jul 21, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,674 Answers

Pull wheels of again & spin rotors & see where/if outside edge on back of rotor touching against spindle or anything. If you see a spot where not touching but very close, concentrate on that area & clean any rust etc off part(s) that it may be rubbing on. Sometimes rust builds up on spindle will cause a noise when you get a little movement on turns. Also be sure your calipers & pads are retracting as they should. Make sure hub was clean before rotor put on, as dirt or rust build up, will cause rotor not to run true. Finally, make sure wheel nuts tight.

Posted on Jul 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Noise right hand front wheel Hyundai Atos.it comes when the car s in motion.sounds like something screeching?


Either bad ball bearing, brake pade, or sheld behind brake pads rubbing againt brake disk

Nov 19, 2017 | Hyundai Cars & Trucks

3 Answers

My car is making a scraping noise on the right front when I apply brakes. Can someone tell me what's going on ??


most probly your brake pads are worn out and the noise you hear is them scraping against the rotor which also may need to be relaced too ,have it checked out by a shop,or a friend who works on cars and save some money.

Jan 28, 2011 | 1999 Buick Park Avenue

1 Answer

98 Nissan Altima Grinding Noise? My mother in law has a 98 nissan altima with an automatic. She recently had the rotors turned and a tie rod end replaced at a local shop. A couple days after the work was...


Hello i would check your wheel bearings or sometimes called bearing hub .Jack car up prop the car with axle stands now remove your tires and rotors once removed wiggle you bearing hub left to the right your bearing hub should have minimal play one side to the other is obvious the looser play hub will be your noise you have been experiencing.most people call this road noise.

Jan 01, 2011 | 1998 Nissan Altima

1 Answer

Horrible scraping/scratching noise coming from wheel


Hello, this would be an easy thing to diagnose. All you need to do is jack up the front of the car, so that you can turn the wheel and listen to it while you wiggle and turn it manually. You're also checking for any wobble and wear in the front end parts at the same time. Next, remove the wheel and inspect the rotor for any scratching to the shiny surface, which could determine where the problem is. If no problem there, rotate rotor and listen for the scratching sound and you will see where its coming from by looking at the brake pads which are visible when the wheel is off.

Sep 16, 2009 | 1992 Mercury Topaz

3 Answers

Scraping pulse noise r front merc sable


Check the condition of the wheel bearings, front and back side if the brake rotor, and the back side of the rim. Everything should be clean, rust build-up can throw everything out of true. The hub or wheel-bearing should be tight and smooth when spun.

May 12, 2009 | Mercury Sable Cars & Trucks

1 Answer

OCCASIONAL Metallic scraping noise - New ceramic brake pads.


You could be right with the wheel bearings. But first take the wheel off and check that nothing is scraping the rotor. Look all the way around the rotor. A suggestion will be that the brake pads have worn enough that the brake pad wear indicator is starting to scrape. Pry them back a little.

Apr 09, 2009 | 1996 Buick Regal Olympic Gold

1 Answer

Ford 1988 escort GL-Front wheel constant scrape-scrape,vibration


sounds like you need new brake pads and the rotors atleast turned down if not replaced
the pads should stop the noise and the rotors should stop the vibration/wobble
thanks wes
ps please rate me

Mar 27, 2009 | 1988 Ford Escort EXP

2 Answers

95 GMC Safari AWD frontend noise


Sounds like the brake pads is still slightly making contact with the rotor. Replace pads and / or rotor.

Could be that the pads are wore out and are just scraping the rotor. Definately replace pads AND rotor.

Could be that the pads have broken their clips and are flopping around.

Could be a rock stuck in the overall brake assembly.

Feb 09, 2009 | 1995 GMC Safari

2 Answers

Scraping sound at very low speed (5MPH)


I have personally seen a lot of wheel bearings go bad on these vehicles. If you hear the noise get more pronounced when turning left, the right front (passenger side) bearing is most likely the culprit- if turning right, it would be the left front (driver side) bearing.

Hope this is helpful!!


Nissan Scope Technician- 10+ years experience in Nissan dealership

Nov 10, 2008 | 2004 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...