It is best to remove the water from the tank
this can be done by removing the outlet hose from the fuel pump and running the pump into a bucket
that will drain the tank and most of the water out
as water and fuel do not mix you will be able to drain the bucket back into the fuel tank as you will see the water in the bottom of the bucket
next you can put about 1 quart of methylated spirits into the tank
connect the fuel line back up and run the engine
the metho breaks down the surface tension of the water and it will go through the equipment and be burnt in the combustion process
there are products that you can put in the tank to do the job also
changing a fuel filter may help but generally fuel conditioners and clean fuel along with a good run (100 miles ) will clean out the system
144 views
Usually answered in minutes!
×