How old is this 357 magnum trooper mk 111 seral number j88988

800 Kpa is 111 PSI and that cannot be attained. Recheck your testing

Hi Larry:
Cars and trucks?
That number is way too short.
Maybe try again with make and model, or just look at the registration.

The VIN number is located on the drivers lower corner of the dash and can be viewed through the windshield from the outside. It is also printed on a placard on the drivers door jamb.

go to repairmanuals.com!!!

is it a gt trooper mod 28 that would be 1978 with solid firing pin

8707

VW Dealer ?

Used one at Salvage Yard-- quick & easy

Open it up & maybe you can clean the contacts

mcdevito75 here, Double check with your local repair shop, and or Georgia motor vehicle dept. about this repair. Also I don:t think you can change the numbers on your replacement unit, it should be sealed.

look in the glove box there is a five digit whit stiker with the code if more than five digit the if seral number you have to call honda dealer parts with this number to get code

Hi,

Assuming your 1995 Isuzu Trooper is using the 3.2 SOHC engine, the firing sequence would be as shown here.
. This was originally posted here. An actual image which was originally posted here.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.